Reviews
Fits: HONDA AA04-PRO, HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA SUPER CUB110-PRO, HONDA CROSSCUB110, HONDA CROSSCUB110, HONDA MONKEY125, HONDA DAX125, HONDA glom, HONDA SUPER CUBC125
Good quality rear sprocket from KITACO
This is a good quality rear sprocket from KITACO, it's made of steel so it's much more durable than the aluminium ones if a bit more heavy but on the plus side it is a lot less expensive also. This is 32 teeth, it's 2 less than the original 34 one so it's better for top speed. Another good quality product from KITACO as usual! View detail
An accessory should be mounted on the vehicle
With 125cc models produced by Hona in recent years. The vehicle's display clock often does not show engine rpm or battery voltage. These two things lead to disadvantages when using a motorbike, especially the voltage problem when the battery is weak, we cannot monitor the exact voltage index at that time. With this OPMID meter, the above disadvantages are resolved, the meter clearly displays rpm as well as the current voltage of the battery. The special thing about OPMID compared to other watches is that it has a touch screen that can interact very sensitively. From there, it makes adjusting parameters much easier and faster. View detail
![PREMIUM ZONE Oil Filler Cap [M20XP2.5]](https://img.webike-cdn.net/catalogue/images/15651/91885_O01_TS.jpg)
Fits: HONDA CBR650R, HONDA CB650R, KAWASAKI KLX250, KAWASAKI ER-6, KAWASAKI ER-4n, HONDA MONKEY, HONDA ZOOMER, HONDA XV1000V, HONDA XR50 MOTARD, HONDA XLR250R, HONDA XLR250BAJA, HONDA X4, HONDA VTR1000F, HONDA SL230, HONDA PCX, HONDA PCX150, KAWASAKI ZXR750, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900
The oil filler cap is very convenient to use and decorate
Daytona brand is a famous brand in the production of spare parts for motorbikes from engines to decorations. In particular, the product set of oil cap, reservoir cap and bar ends comes from Daytona premium, I feel the quality is improved compared to normal Daytona. With this set of oil caps, compared to the original cap, I find that it is not only used for decoration with many colors to choose from, but also can be easily opened and closed to make changing the oil easier. With a normal OEM oil cap, I usually spend about 2 to 3 minutes opening and closing the oil cap. With the Daytona oil cap, it only takes 30 seconds to do that. View detail
Fits: HONDA XR50 Motard, HONDA Ape 100, HONDA Ape 50, HONDA APE 50, HONDA APE 100 TypeD, HONDA APE TypeD, HONDA XR100MOTARD
Genuine Kitaco Kick Pedal for APE 100
This was a replacmemt for the standard that a customer wanted to try to improve the look of the bike as the OEM was not looking to great. Finding a replacement after market one was not hard as after reading a lot of forums for the APE100 the consensus was the Kitaco one for sure. The price for the Kitaco kick pedal was great value and chepaer than the OEM Honda one anyway. I do not generally use after market parts but this customer definitely wanted this brand. With a few other parts, the order was shipped using EMS and arrived in 5 days from being shipped. The kick pedal arrived in the Kitaco packaging and is a really nice piece of kit if I am honest. The finish is a brilliaint almost chromed look but I am sure it is just very well poilished. The fitment was not tricky at all as it is literally one bolt and that's it. The shape is virtually the same as the OEM so no problems with it movement. Veyr happy customer right here. Thanks Webike. View detail
![Crankshaft [X-Beam Connecting Rod Strengthened Type]](https://img.webike-cdn.net/catalogue/images/70970/01-10-0144_TS.jpg)
Fits: HONDA GROM, HONDA GROM, HONDA GROM, HONDA MSX125, HONDA MSX125SF, HONDA MONKEY125
The install has been on my to do list for a while now and I am relieved to now have it fitted
About quality and texture - The X-Beam connecting rod crankshaft from SP Takegawa is made from forged steel with a shot-peened surface finish, the quality from the overall fit and finish is perfect. About the feeling of use - The X-Beam connecting rod crankshaft install has been on my to do list for a while now and I am relieved to now have it fitted along side my top end big bore kit. Products to buy together - A key product to buy together with the X-Beam connecting rod crankshaft is the crankshaft support adapter that SP Takegawa also sell, this will add support the left side of the crankshaft and reduce vibration. Difficulty of installation - The installation of the X-Beam connecting rod crankshaft is an advanced task that took many hours to complete due to the extensive disassembly of the engine. Mechanical aptitude and the use of special tooling and basic hand tools is what is required to secure the X-Beam connecting rod crankshaft to the crankcase. Cost performance and comparison with other products - I find the cost of all the products SP Takegawa sell to be on par when compared to what most other companies sell their products for and the X-Beam connecting rod crankshaft is no different. About shipping and packaging - With there being no significant cost difference between sea freight and EMS for the X-Beam connecting rod crankshaft, I chose EMS for a earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing. View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
BlackShort Tube - The Best Of BlackShort Tube
I purchased Z thinking it was a Short Tube in Black.
Idling is quieter than OEM, but brazen as it starts running and revs up.
The black paint also seems to work well with the Stainless Steel material, and there is no fading or peeling of the paint. Except for stepping stones,
The volume is tame, but you may choose it for its design appearance.
View detail
The YOSHIMURA
The sound is totally different from the OEM Exhaust System and is very good. The price is a bit steep, but it is worth it. View detail
Fits: HONDA CBR1000RR-R SP, HONDA CBR1000RR-R
The identity of the servo can seraer.
I could not figure out what the servo can seraer.
The object in the photo appears to be adding resistance to the servo.
View detail
Fits: HONDA CBR1000RR-R SP, HONDA CBR1000RR-R
Quiet Powerful feeling
From AXIS Labs' Slip-on SilencerCarbon
Spec. changed to Slip-on lineTruck di.
The Carbon has a pipe diameter of just over 50mm, and the Truckdi has a pipe diameter of about 60mm.
The latter is quieter and more powerful.
Heat Guard will be attached separately.
Exhaust System band should be a little cheaper to tighten.
View detail
Fits: HONDA DJ-1-RR, HONDA G', HONDA CABINA 50, HONDA CROSS CUB 50, HONDA JULIO, HONDA JOKER Helmet 50, HONDA Giorno, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50 Standard, HONDA SUPER CUB 50 DELUXE, HONDA SUPER CUB 50 Super custom, HONDA SUPER CUB 50 PRO, HONDA SUPER CUB 50 PRO, HONDA SUPER DIO, HONDA SUPER DIO -SR, HONDA SUPER DIO -ZX, HONDA TACT, HONDA TACTSTAND-UP, HONDA TACT
OEM same etc., inexpensive and good.
It was used for the second Exhaust System removal and installation.
The texture was almost the same as OEM.
Since it is Gasket, the feel is comfortable.
Quantity:1 Set of 2pcs. so it is also cosmetically pleasing.
View detail
Fits: BMW S1000RR, BMW S1000RR HP4, BMW S1000R
Cospar good
After 10,000 km, the Large Rotor was stepped, so it was replaced.
The price is lower than the OEM Rotor and it is the same brembo as the OEM, so I didn't hesitate to buy it.
Installation is very easy
Accuracy seems fine. Thickness is the same as NORMAL.
I guess the wear of the rear brake rotor after 10,000 km is the price to pay for the front and rear interlocking brakes.
View detail
Fits: KAWASAKI Z250, KAWASAKI Ninja250, YAMAHA TZR50R, YAMAHA TZR50, YAMAHA TZM50R, YAMAHA TZ50, TRIUMPH TIGER1050, SUZUKI BURGMAN400, SUZUKI BURGMAN400, SUZUKI BURGMAN200, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE250 burgman, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman TypeM, SUZUKI SKYWAVE250 burgman SS, SUZUKI DR800S, KAWASAKI ELIMINATOR 125, KAWASAKI Z400, KAWASAKI Z400, KAWASAKI Z250SL
Brake Pads for Street Riding
I purchased and installed these Brake Pads for my Ninja 250SL for urban driving (commuting). The cost performance is unquestionably good, but it is still a bit expensive. "Red Pad. Compared to the OEM Brake Pads, the Brake Pads are more controllable and cost-effective, so we recommend these Brake Pads to Mainers who drive in the city. View detail
The stuff is good, but I wonder if it's expensive.
[How is it used?
Along with the replacement of the front caliper, I have also replaced the brake hose. Therefore, this one will also have to be replaced.
For OEMs, the Adapter and Hose are integrated, so if the Hose is changed, the Adapter will no longer be usable.
You could say it's an exchangeable necessity.
Was the one you received as per Image?
Active's is solid and is as per Image.
The product is small, but the packaging is well made.
good impression
Was the installation difficult?
It was a little difficult.
The Hose from ABS is one that cannot be bent made of the genus Gold, so the angles are complicated.
To remove the OEM Adapter, the Right SideSide cowl and Front Fender must be removed (not necessarily young to remove, but hard to work without them).
After that, the coolant tank on the Right Side can be removed to make the work smoother!
How was your experience with it?
Same as OEM.
It's hard to say, since it's not very visible.
Since it is to be replaced along with the replacement of the hose, it is sufficient if it functions well~.
No Fluid leaks, etc.
[Included Parts:were they on?
No, sir.
[Was there anything that disappointed you?
The construction is very good, so none.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
It's a Small richer one, but at such a price it's a bit expensive.
But there is no other Brand that offers something like this except Active, so this is the only option!
New ModelGSX1300R HAYABUSA needs this one if Hose is replaced!
The length of the Hose is also listed in case you are interested.
Quantity:Pair (for Left and Right) The 360mm is just right for both of them.
View detail
Fits: HONDA CB400SB Revo, HONDA CB400SF Revo, HONDA CB400SF, HONDA CB400SB
For an easy and good looking Position!
I fell and bent it. If I'm going to replace it, I want to replace it with a cool Other Brand Product." I replaced it with a new one. Anyway, the gold color is cool! And the most important position, I am satisfied with the large size of the Handlebar, which makes me less tired when I am touring! I strongly recommend replacing the handlebar before replacing the exhaust system! View detail
Fits: HONDA CRF250R, HONDA CRF450R, KAWASAKI KX250F, KAWASAKI KX450F, KAWASAKI KLX450R, KAWASAKI KX125, KAWASAKI KX250, HONDA CR250, HONDA CR125
Anodized is beautiful.
MX-123 was installed on a CRF250.
OEMSeat is modified with 3cm up high seat and 14mm up spacer to get the best position.
View detail
Fits: Others , SUZUKI V STROM 650
Easy to install
Model:YZF-R25
I was about to buy Repair/Option Parts, but changed my order because Body was on sale for less. I have used it before to reduce vibration on a single cylinder and I am using it on my R25. Recently, I have been trying to increase or decrease the weight because I am concerned about the vibration, and when I made it heavier than 350g, my whole arm went numb, so now I am going to try 300g.
View detail
easy to read
I installed the mirror on my MONKEY125 because it was hard to see. The rearward view is not only easier but also extended to the front, so I can use it very comfortably with less eye movement. View detail
Fallen cannibals
I use Retractable Lever, but I bought this one just in case.
I have not yet encountered a situation where I can install it and see how it performs, so I can only judge it by its appearance.
Cut-out products are quite satisfying just to install.
When installing, make sure that the Clutch Side and Brake Side are facing in the correct direction, as it is indicated on the package which side it is on. Also, there is no indication of which way is up or down. Use your own experience to cover it.
View detail
The usual.
This is the Lock wire I use all the time.
I bought it because it was out of stock.
I have Sizes before and after this one, but the 0.57mm is the most versatile.
View detail
Roughness is noticeable but sufficient Level
The end of the cord is divided into a Headlight wire and a Connector that holds together the OthersBlinker and other components.
It looks like Gold genus and is a bit heavy.
Blinker also has a slightly unique switch. Normally, the switch can be returned to the center position by pressing it lightly, but this switch will not return. You need to return it to the Center position by yourself. It is so difficult to return that the opposite Blinker will be attached if you do not press it with a good degree of force.
View detail