
Reviews
![iX-09W GEKKOTA [80/100-21 51M WT] Tire](https://img.webike-cdn.net/catalogue/images/49992/iX-09WG_01F_TS.jpg)
Fits: SUZUKI RM-Z250, BETA X-Trainer 250, BETA X-Trainer 300, YAMAHA YZ250F, YAMAHA YZ125, YAMAHA YZ450F, SUZUKI RM-Z450, SUZUKI DR-Z400SM, SUZUKI RM250, SUZUKI RM125, SUZUKI DR250R, SUZUKI RMX250, SUZUKI DR250S, KTM 450XC-F, KTM 250XC-F, KTM 450SX-F, KTM 250SX-F, KTM 350XC-F, KTM 250XC, KTM 250SX
I don't know when Front should be replaced.
This is a front tire that you can't go wrong if you choose this one.
It doesn't (can't) decrease at all, so the Timing of the exchange is totally lost every time.
View detail
![GEOMAX AT82 [80/100-21 51M WT] Gio Max Tire](https://img.webike-cdn.net/catalogue/images/131573/front_TS.jpg)
Fits: KTM 450EXC-F, KTM 450EXC-F, KTM 450EXC-F, KTM 250EXC, KTM 250EXC, KTM 250EXC, KTM 250EXC, KTM 250EXC, KTM 200EXC, KTM 125EXC, KAWASAKI KX450X, KAWASAKI KLX230R S, KAWASAKI KLX230R S, KAWASAKI KX450X, KAWASAKI KLX230R S, KAWASAKI KX450X, KAWASAKI KX250X, KAWASAKI KX250X, KAWASAKI KX250X, SUZUKI RM250
AT81 Successor MODEL Front
CRF250RXCompetition model ME12-1300... Used for front tire
AT81 has been discontinued and the model has been changed to AT82. The same tires are used in the same quantity as the newly installed AT81.:I used 2 sets and had no complaints. (OFFRacer beginner) However, it was worn out and we decided to use the successor model, AT82, as a replacement.
AT81 has a size of 90/90-21, AT82 does not have the same size setting and R (R and RX have the same Rim size of 1.60) In the catalogue, the outer diameter was increased by 3mm and the width was decreased by 8mm, but I don't feel any problem in appearance and handling. The handling is a little lighter, but this may be due to the fact that I also installed AT82 rear tires. 3 times I drove the car, the grip was very good because the road surface was in the best condition at all times &Brand New Tire. I have not been able to evaluate the performance in bad conditions. (^_^;)
His own Level is DClass in Grass Race, and he is a self-proclaimed Racer beginner with 3 years of competition model experience.
View detail

Fits: HONDA 400X, HONDA 400X, HONDA CB250R, HONDA CBR250RR, HONDA CBR400R, HONDA CRF250M, HONDA CRF450L, HONDA CRF450RX, HONDA REBEL(REBEL)500, YAMAHA MT-03, YAMAHA MT-25, YAMAHA YZ250X, YAMAHA YZF-R25, YAMAHA YZF-R3, SUZUKI GSX250R, SUZUKI SV650, SUZUKI SV650, SUZUKI SV650X, SUZUKI DL1000 V-STROM250, SUZUKI DL1000 V-STROM250
Always I am indebted
As long as you have Kashimaru-kun, you can finish the Chain exchange in a jiffy!
This time, it was Piece stuffing with Sprocket change, so I also did Cut.
Takes about 30 minutes
Kashimaru-kun is a little expensive, but I recommend it because you can easily do the Chain replacement work at home.
View detail
![PROTECH TRAIL WINNER GP-410 [120/80-18 M/C 62P TL] Protec Trail Winner Tire](https://img.webike-cdn.net/catalogue/images/114514/GP-410-06_TS.jpeg)
Fits: YAMAHA SEROW225 WE, YAMAHA SEROW225 WE, YAMAHA SEROW225 WE, YAMAHA SEROW225 WE, YAMAHA SEROW225 WE, YAMAHA BRONCO, YAMAHA SEROW225 W, APRILIA RX125, APRILIA RX125, APRILIA RX125, APRILIA RX125, HONDA CX400, HONDA CX500 TURBO, HONDA NV400, HONDA SL230, HONDA SL230, HONDA SL230, HONDA SL230, HONDA SL230, HONDA XR230
For people who occasionally go to forest roads.
I was hesitating between this and GP610, but I chose GP610 because I do a lot of on-road touring, and this one is more suitable for my life! View detail

Fits: HONDA CR125R, HONDA CR250R, HONDA CRF150F, HONDA CRF230F, HONDA CRF450L, HONDA SL230, HONDA XR230, HONDA XR250, HONDA XR250BAJA, HONDA XR250MOTARD, HONDA XR250R, HONDA XR400R, HONDA XR650R, HONDA CRF250F, HONDA CRF250R, HONDA CRF250RX, HONDA CRF250X, HONDA CRF450R, HONDA CRF450RX, HONDA CRF450X
It hasn't arrived yet.
What kind of an intellect would ask me to write an Impression when it hasn't even arrived due to a delivery error? You should be more careful about making fun of me! View detail

Fits: BETA RR 125 2T, BETA RR 125 2T Racing, BETA RR 200 2T, BETA RR 250 2T, BETA RR 250 2T Racing, BETA RR 300 2T, BETA RR 300 2T Racing, BETA RR 350 4T, BETA RR 350 4T EFI, BETA RR 350 4T Factory, BETA RR 350 4T Racing, BETA RR 390 4T, BETA RR 390 4T Racing, BETA RR 400 4T, BETA RR 400 4T Racing, BETA RR 430 4T, BETA RR 430 4T Racing, BETA RR 450 4T, BETA RR 450 4T Racing, BETA RR 450 4T Racing
Reliable Moto master!
Moto master products, which I have been using for brake disc rotors and other products, have excellent durability, so I can ride my motorcycle with peace of mind. The hybrid aluminum and steel bike I bought this time is light and feels good. View detail
![PROTECH TRAIL WINNER GP-610 [120/80-18 M/C 62P WT] Protec Trail Winner Tire](https://img.webike-cdn.net/catalogue/images/114732/GP-610-06_TS.jpeg)
Fits: YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R, YAMAHA BRONCO, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R, YAMAHA SEROW225 W, YAMAHA DT200R, HONDA CRF250L, HONDA CRF250L, HONDA CRF250 RALLY, HONDA CRF250 RALLY, HONDA CRF450L, HONDA CRF250L
Current Best
I have used T63, MT21, D605, TrailYAMAHA Super JOGZr Wing Black302, TR-8, GP22 and it is a good Tire.
I feel the evolution of the Tire; I have never seen a Tire that has such a sense of security when on the road while still providing good drivability on dirt. The ancestor TR-8 was a bit scary.
IRC is also easy to change tires.
The only negative is the short life.
View detail
![216MX [80/100-21 51R TT] Tire](https://img.webike-cdn.net/catalogue/images/51829/216MX_02_TS.jpg)
Fits: YAMAHA YZ250FX, YAMAHA YZ250X, YAMAHA YZ450F, YAMAHA YZ250F, YAMAHA YZ250, YAMAHA YZ450FX, YAMAHA YZ125, YAMAHA YZ450FX, SUZUKI RM-Z250, KAWASAKI KX250X, HONDA CRF250X, HONDA CRF450R, HONDA CRF250R, HONDA CRF450R, HONDA CRF250R, HONDA CRF450R, HONDA CRF250R, HONDA CRF450R, HONDA CRF250R, HONDA CRF450R
Satisfied
Corner on on-road depends on Speed, but it feels scary, but off-road it feels safe.
Next time, it will be Repeat.
View detail

Fits: HONDA 400X, HONDA 400X, HONDA CB250R, HONDA CBR250RR, HONDA CBR400R, HONDA CRF250M, HONDA CRF450L, HONDA CRF450RX, HONDA REBEL(REBEL)500, YAMAHA MT-03, YAMAHA MT-25, YAMAHA YZ250X, YAMAHA YZF-R25, YAMAHA YZF-R3, SUZUKI GSX250R, SUZUKI SV650, SUZUKI SV650, SUZUKI SV650X, SUZUKI DL1000 V-STROM250, SUZUKI DL1000 V-STROM250
For Chain installation.
I removed the OEMChain, cleaned and oiled it. I did not have a Caulking Tool when I re-installed it, so I chose the Clip type. I was satisfied with the easy installation. View detail

Fits: HONDA CB150M, HONDA CBF150M, HONDA CRF250 RALLY, HONDA CB250F, HONDA CB250R, HONDA CBR250R, HONDA CBR250RR, HONDA CRF250L, HONDA CRF250L, HONDA CRF250M, HONDA CRF250M, HONDA GB350, HONDA GB350 S, HONDA 400X, HONDA 400X, HONDA CBR400R, HONDA CBR400R, HONDA CRF450L, HONDA CB650R, HONDA CBR650R
MONKEY125
I like the texture. 。
Note that Bolt is not included.
View detail

Fits: HONDA CRF250X, HONDA CR250, HONDA CR125, HONDA CRF150R, HONDA CRF250R, HONDA CRF250RX, HONDA CRF450R, HONDA CRF450RX, HONDA CRF450L, HONDA CRF450RL, HONDA CRF450X, HONDA CRF250L, HONDA CRF250M, HONDA CRF250L(S), HONDA CRF250RALLY, HONDA CRF250RALLY(S), HONDA CRF1000L AFRICA TWIN, HONDA CRF1000L AFRICA TWIN DCT, HONDA CRF1100L AFRICA TWIN, HONDA CRF1100L AFRICA TWIN DCT
Lower than NORMAL
"To ensure road clearance in full bank conditions, the peg length was reviewed, the footpeg was increased, etc., and the car was designed specifically for MOTARD driving."
I bought it hoping that it would not rub the footpeg and that it would be a high footpeg because it says so in the product description, but it is about 10mm lower than NORMAL because it has a Slider.
Sorry, but Peg=Pedal is shorter, but it does not make sense because the minimum ground clearance is lower.
View detail
![ERSeriesChain 520ERVT Gold [with Clip(FJ)Joint].](https://img.webike-cdn.net/catalogue/images/63583/520ERVT_G_G_P_TS.jpg)
Fits: HONDA CRF250M, HONDA CRF250R, HONDA CRF450L, HONDA CRF450R, HONDA CRF450RX, YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ250F, YAMAHA YZ250X, YAMAHA YZ450F, SUZUKI RM-Z450, SUZUKI DL1000 V-STROM250, SUZUKI DL1000 V-STROM250, KAWASAKI KLX230, KAWASAKI KLX230R, KAWASAKI KX250, KAWASAKI KX450, HONDA AX-1, HONDA CR125, HONDA CR125
DID Daido ERSeriesChain 520ERVT Gold
Compared to the Non-seal Chain, it has a little more weight, friction, and initial elongation, but seems to have less rotational noise.
I really like the texture of the Gold plating.
View detail
![VX40 [80/100-21 51M WT] Tire](https://img.webike-cdn.net/catalogue/images/106513/VX40-07_TS.jpeg)
Fits: YAMAHA YZ450FX, YAMAHA YZ250X, YAMAHA YZ250FX, YAMAHA YZ250F, YAMAHA YZ450F, YAMAHA YZ250, YAMAHA YZ125, YAMAHA YZ450FX, YAMAHA YZ250FX, YAMAHA YZ450F, YAMAHA YZ250F, YAMAHA YZ250, YAMAHA YZ450FX, YAMAHA YZ125, YAMAHA YZ250FX, YAMAHA YZ250F, YAMAHA YZ450F, YAMAHA YZ250, YAMAHA YZ125, YAMAHA YZ450FX
Replaced with VE35
We tried VX40 to improve the slippage of the front tire when driving downhill on clay slopes and on camber, which had been a weak point due to the stiffness of the VE35 tires. They did a better job than expected.
Life may be a little less expensive than VE35, but VE35 is a lot more comfortable to use. (due to its hardness) Maybe too good.
We rarely replace front tires, so we replaced the tubes and head stoppers in conjunction with the front tires.
View detail
![GEOMAX MX34 [80/100-21 51M WT] Tire](https://img.webike-cdn.net/catalogue/images/123476/front_TS.jpg)
Fits: HONDA CRF250R, BETA X-Trainer 250, BETA X-Trainer 250, BETA X-Trainer 250, BETA X-Trainer 300, BETA X-Trainer 300, BETA X-Trainer 300, GASGAS MC125, GASGAS MC125, GASGAS MC250F, GASGAS MC250F, GASGAS MC450F, HONDA CR250, HONDA CRF250R, HONDA CR125R, HONDA CR125R, GASGAS MC450F, HONDA CR125R, KTM 450XC-F, YAMAHA YZ250
Does it sting a lot …?
I used it for 2daysEnduro.
I left the Front on for 2 days and used the air pressure at about 0.6 on the Large body. I can feel a clear evolution from the previous 33, and I can feel less swaying of the tire at the corner ring, and I strongly feel the rigidity of the straight road. I used it on a hard surface, so I didn't feel the stinging sensation, but I had a strong sense that the tire was supporting me well.
The durability of the key seems not to have evolved much from the previous model; the Block doesn't fly off, but the horns seem to lose their shape relatively quickly.
View detail
![VXSeriesChain 520VX3 Gold [with Crimp(ZJ)Joint]](https://img.webike-cdn.net/catalogue/images/59741/520VX3_G&G_P.jpg)
Fits: HONDA 400X, HONDA 400X, HONDA CB250R, HONDA CBR250RR, HONDA CBR400R, HONDA CRF250M, HONDA CRF450L, HONDA CRF450RX, HONDA REBEL(REBEL)500, YAMAHA MT-03, YAMAHA MT-25, YAMAHA YZ250X, YAMAHA YZF-R25, YAMAHA YZF-R3, SUZUKI GSX250R, SUZUKI SV650, SUZUKI SV650, SUZUKI SV650X, SUZUKI DL1000 V-STROM250, SUZUKI DL1000 V-STROM250
It's quiet.
After I changed it, it became much quieter.
The other sounds were so distracting. (possibly Bearing)
It looks Gold and I am satisfied with it.
View detail
![VX Series Chain 520VX3 Stainless Steel [with Caulk (ZJ) Joint]](https://img.webike-cdn.net/catalogue/images/59741/520VX3_Steel_P.jpg)
Fits: KAWASAKI KLX650SR, KAWASAKI Ninja ZX-6R (ZX636), KAWASAKI KLX230, KAWASAKI KDX250SR, SUZUKI DR200, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA XJ6NA, YAMAHA TT250R, YAMAHA TT250R, YAMAHA TT250R, YAMAHA SRX400, YAMAHA MT-25, YAMAHA MT-03, HONDA FTR250, HONDA CRM125, SUZUKI RG250E, SUZUKI RG200 γ, SUZUKI MARAUDER250, SUZUKI INTRUDER250LC
Highly Recommended for Original Motorcycle Parts!
I’m very impressed! They offer a great selection of original, high-quality motorcycle parts that fit perfectly. The website is easy to navigate, and I had no trouble finding what I needed. Customer service was responsive and helpful with compatibility questions, and shipping was fast. Overall, a reliable and trustworthy site for all your motorcycle part needs! View detail

Fits: HONDA FS125, HONDA NT1100, HONDA CRF1100, HONDA CBR1000ST, HONDA CBR1000SP, HONDA CB1000R, HONDA CBR650R, HONDA CB650R, HONDA CRF450L, HONDA CBR400R, HONDA 400X, HONDA GB350 S, HONDA GB350, HONDA CRF250M, HONDA CRF250L, HONDA CBR250RR, HONDA CBR250R, HONDA CB250R, HONDA CB250F, HONDA CRF250 RALLY
Dress-up with super easy custom parts
I did a dress-up with very simple custom parts (Master cylinder cap Rear) that even an amateur can do.
The Dress-up of the Blue master cylinder cap Rear with glimpsed White colored MORIWAKILogo is Outclassing effect!
Oh Wonderful!
View detail
![M5B EVO[80/100-21 51M WT]Tire](https://img.webike-cdn.net/catalogue/images/92993/M5Bevo-9_TS.jpg)
Fits: KTM 250EXC, YAMAHA YZ450FX, YAMAHA YZ250X, YAMAHA YZ250FX, YAMAHA YZ250F, YAMAHA YZ450F, YAMAHA YZ250, YAMAHA YZ125, YAMAHA YZ450FX, YAMAHA YZ250FX, YAMAHA YZ250F, YAMAHA YZ450F, YAMAHA YZ250, YAMAHA YZ125, YAMAHA YZ450FX, YAMAHA YZ250FX, YAMAHA YZ250F, YAMAHA YZ450F, YAMAHA YZ250, YAMAHA YZ125
Effective downhill on the slopes
Used in MASTER at Beginners Enduro, White Valley Matsubara.
I was able to get a safe Speed without getting caught in the Front on the Black dirt downhill or mud.
However, I am afraid that the Tire will sag if Speed is applied on a hard Motocross-like surface such as TESIAS Lunch.
Recommendation to use in Muddy or on the slopes.
View detail
![VXSeriesChain 520VX3 Gold [with Crimp(ZJ)Joint]](https://img.webike-cdn.net/catalogue/images/59741/520VX3_G&G_P.jpg)
Fits: HONDA 400X, HONDA 400X, HONDA CB250R, HONDA CBR250RR, HONDA CBR400R, HONDA CRF250M, HONDA CRF450L, HONDA CRF450RX, HONDA REBEL(REBEL)500, YAMAHA MT-03, YAMAHA MT-25, YAMAHA YZ250X, YAMAHA YZF-R25, YAMAHA YZF-R3, SUZUKI GSX250R, SUZUKI SV650, SUZUKI SV650, SUZUKI SV650X, SUZUKI DL1000 V-STROM250, SUZUKI DL1000 V-STROM250
Cospar good
Good cosmetic design.
It is a beautiful Gold.
It is light in use.
View detail

Fits: SUZUKI RMZ250, KAWASAKI KX450F, KAWASAKI KX450, KAWASAKI KX250F, KAWASAKI KX250, KAWASAKI KX250, KAWASAKI KX125, HONDA CRF450X, HONDA CRF450X, HONDA CRF450RX, HONDA CRF450R, HONDA CRF450L, HONDA CRF250X, HONDA CRF250R, HONDA CR250R, HONDA CR125R
Works pretty well on the Kawasaki Z900RS
This part isn't officially compatible with the Kawasaki Z900RS but i saw someone on Instagram use it and really liked the design, so decided to risk it. The part looks great and fits the bike well although it drops the bar down pretty low. Coz of this, some adjustment will be needed to make sure the controls or the throttle cable tubing doesn't hit the tank when the bars are fully locked to the left or right. View detail