Reviews
Fits: BETA RR 125, BETA RR 200, BETA RR 250, BETA RR 300, BETA RR 350, BETA RR 390, BETA RR 430, BETA RR 480, HUSQVARNA FC 250, HUSQVARNA FC 250, HUSQVARNA FC 350, HUSQVARNA FC 350, HUSQVARNA FC 450, HUSQVARNA FC 450, HUSQVARNA FE 250, HUSQVARNA FE 350, HUSQVARNA FE 450, HUSQVARNA FE 501, HUSQVARNA TC 125, HUSQVARNA TC 125
In case of emergency
[How is it used?
Used in Enduro race with HUSQVARNA FE350.
I was thinking a lot about how to prevent Damage as much as possible to avoid falling over and lever damage→re Tireetc. even though we are in Race, and my friends were thinking about this X-GRIP XGrip Anti Break ClutchClamp I decided to purchase the product after hearing about the effectiveness of the product.
The structure is simple:a plastic-like material is placed inside the ClutchClamp, and when it falls over, the lever itself does not break, but the Clutch-Holder itself rotates to release the force.
Although it is better not to fall over, it is better to wear it in case of an emergency.
Recently, the supply of parts for Husk and KTM has been delayed more than before, and if a part is damaged even slightly, it is sometimes difficult to repair it, but it can be considered a part to avoid breaking OEM Parts.
View detail
Fits: GASGAS EC125, GASGAS EC250, GASGAS EC250F, GASGAS EC300, GASGAS EC350F, GASGAS EC450F, GASGAS EC500F, GASGAS EX250, GASGAS EX250F, GASGAS EX300, GASGAS EX350F, GASGAS EX450F, GASGAS MC125, GASGAS MC150, GASGAS MC250, GASGAS MC250F, GASGAS MC300, GASGAS MC350F, GASGAS MC450F, GASGAS MC85
It looks good, feels grippy, and is great in mud!
[How is it used?
I bought this as a footpeg for my Husqvarna 2025 TE250/300.
Large hole in the center for better mud shedding performance on muddy surfaces. Anti-Mud." I chose the
Was the one you received as per Image?
It was just as Image.
When I received it, I thought "it could be more Wide", but when I saw it in person, it was not uncomfortable. Satisfied.
Was the installation difficult?
It is a normal, footpeg replacement.
Recommendation to work with Mechanical Gloves or similar as GizaGiza is very sharp!
By the way, I accidentally hit my finger on GizaGiza when I was washing the car and it bled (lol).
How was your experience with it?
It feels like it is firmly wedged into Boots.
It also feels more stable than it looks, or more secure, like a Wide Footpeg.
As it looks, it is hard to clog with mud. However, there is a concern that it may be deformed when it is hit hard against an obstacle, although I think it is strong because it is Titanium.
[Included Parts:were they on?
Seal and Rubber Key Holder were included.
[Was there anything that disappointed you?
Not particularly
View detail
Fits: GASGAS EC 250, GASGAS EC 250 F, GASGAS EC 300, GASGAS EC 350 F, GASGAS MC 250 F, GASGAS MC 450 F, HUSQVARNA FC 250, HUSQVARNA FC 350, HUSQVARNA FC 450, HUSQVARNA FE 250, HUSQVARNA FE 350, HUSQVARNA FE 450, HUSQVARNA FE 501, HUSQVARNA TC 250, HUSQVARNA TE 150 I, HUSQVARNA TE 250 I, HUSQVARNA TE 300 I, KTM 250 EXC TPI, KTM 250 EXC TPI SIX DAYS, KTM 250 EXC-F
CROSSPRORadiator installed 22 KTM250 EXC Tpi
It was installed without any problems.
Quantity:Pair (for Left and Right) With the upper radiator hose of the
The board on the IN side with the connecting shaft is attached to the Quantity:Set and fix the board on the OUT side.
OEMFront Guard with Quantity:Set and secure with the supplied Bolt and you are done.
The bolt on the lower part of the Right Side is 5mm longer than the thickness of the Horn mounting plate of the public road spec.
I believe the impact from the SIDE will be protected.
View detail
Fits: HARLEY-DAVIDSON FXDWG DYNA WIDEGLIDE 2016, HONDA CRF250 RALLY, HONDA CRF250L, HONDA CRF250L, HONDA CRF250L, HONDA CRF250L, HONDA CRF250R, HONDA CRF250R, HONDA CRF250X, HONDA CRF250X, HONDA CRF450R 2016, HONDA CRF450R 2017, HONDA CRF450R 2018, HONDA MTX125R 1982, HONDA MTX200R/RII 1983, HONDA MTX200R/RII 1985, HONDA NX125 1988, HONDA RTL300R 2016, HONDA TL125 (TLR125), HONDA TLM200 1985
KDX200SRFront tire tube replacement used
KDX200SRFront tire was used because the tube was damaged when replacing the tire. I am glad to know that Dunlop products are inexpensive and reliable. View detail
![ERSeriesChain 520ERVT Gold [with Clip(FJ)Joint].](https://img.webike-cdn.net/catalogue/images/63583/520ERVT_G_G_P_TS.jpg)
Fits: HONDA AX-1, HONDA CR125, HONDA CR125, HONDA CR125, HONDA CR125, HONDA CR125, HONDA CR125R, HONDA CR250, HONDA CR250, HONDA CR500, HONDA CR500, HONDA CRF250 RALLY, HONDA CRF250L, HONDA CRF250M, HONDA CRF250R, HONDA CRF250R, HONDA CRF250X, HONDA CRF450L, HONDA CRF450R, HONDA CRF450R
Repeat in good shape.
The Chain itself is not as stiff as the OEM one and the gold is more beautiful.
It is also lighter in circumference than the used OEM.
To install, connect it to the old Chain as shown in the photo.
The replacement was completed easily by turning the Tire. I installed it with Grease inside the O-ring and Pin of the Clip firmly in place.
Cutting and Plate are also light press fitting, so it is safe to say that the CrimpTool should be a solid one like Kashimaru-kun.
View detail
![Rear Sprocket [Drive Sprocket]](https://img.webike-cdn.net/catalogue/images/16991/t101_TS.jpg)
Fits: KTM 125EXC, KTM 125GS, KTM 125LC2, KTM 125MX, KTM 125SX, KTM 200EXC, KTM 200SX, KTM 250EX Racing, KTM 250EXC, KTM 250EXC-F, KTM 250MX, KTM 250SX, KTM 250SX-F, KTM 300EXC, KTM 300GS, KTM 300SX, KTM 350LC4 ENDURO, KTM 350SX, KTM 360EXC, KTM 380EXC
Used on KTM 250EXC Rear
I bought this for the Rear Sprocket of my KTM 250EXC, which I always use for touring on forest roads.
There is a slope in the forest road that I usually take, but I was having trouble climbing it.
I had been a Large minute long Final, so I chose 52T so that the Speed would be suitable for hills.
Then I was able to ride Speed as I entered the hill and climb all the way up.
KTM's Sprocket was unexpectedly not available in the lineup, and I was very grateful that ISA was selling it.
I will also buy ISA when I change the Setting!
View detail
Fits: APRILIA MX125, APRILIA MX125 Supermoto, APRILIA RX 125, APRILIA RX 125 ENDURO, APRILIA RX 125 SUPERMOTARD, BENELLI 449 CROSS, bimota DBX 1100, BMW 1200 HP2 SPORT, BMW G450 ENDURO, BMW R1200 HP2 ENDURO, BMW R1200 NINE-T, BMW R1200 NINE-T PURE, BMW R1200 NINE-T RACER, BMW R1200 NINE-T SCRAMBLER, BMW R1200 NINE-T URBAN GS, CAGIVA ELEFANT 900, CAGIVA ELEFANT 900, DUCATI 1158 MULTISTRADA V4 PIKES PEAK, DUCATI 1200 MULTISTRADA, DUCATI 1200 MULTISTRADA S
yzf-r15m
I use it for Circuit driving with yzf-r15.
I use this because I don't have many other options.
It works well and runs out fast.
View detail
![Motorcycle Chain 520 Size Gold [Caulking Joint Included]](https://img.webike-cdn.net/catalogue/images/87737/gold_TS.JPG)
Fits: APRILIA AF-1 FUTURA, APRILIA PEGASO, APRILIA PEGASO 2, APRILIA PEGASO 3, APRILIA PEGASO ie, APRILIA PEGASO650 STRADA, APRILIA PEGASO650 TRAIL, APRILIA RS, APRILIA RS, APRILIA RS EXTREMA, APRILIA RS Sport Production, APRILIA RX SIX DAYS, APRILIA TUAREG RALLY, APRILIA TUONO, APRILIA WIND, bimota DB1, bimota YB7, BMW F650, BMW F650GS, BMW F650GS
Gold coloration?
I bought it because it is cheaper than other companies' with Color Ki.
Gold from other companies seems more blackish, but this has a yellowish tint.
My Ninja400, 2020KRT color has gold as a color insert, so I thought it would match, but this Chain is more yellow, so it's not what I was expecting.
I guess it wouldn't bother me if it were any other color.
View detail
![M5B EVO[80/100-21 51M WT]Tire](https://img.webike-cdn.net/catalogue/images/92993/M5Bevo-9_TS.jpg)
Fits: BETA X-Trainer 250, BETA X-Trainer 250, BETA X-Trainer 250, BETA X-Trainer 300, BETA X-Trainer 300, BETA X-Trainer 300, CLEVELAND FX110, GASGAS MC125, GASGAS MC125, GASGAS MC125, GASGAS MC125, GASGAS MC250, GASGAS MC250F, GASGAS MC250F, GASGAS MC300, GASGAS MC450F, GASGAS MC450F, GASGAS MC450F, HONDA CR125R, HONDA CR125R
Safe for Breaking in muddy areas.
Used in Shinshu Large Town ChallengeField. Especially in the forest course, there were soft mountain roads or muddy areas, so we changed our shoes.
I also tried M5B for Front, but I did not have much experience in riding hard courses, so I participated in a little school and learned a lot from Large, such as the winning streak of slowly descending a steep descent while hanging on to Front.
I think there was also the performance of this Tire in particular, but the Front was downhill. I'd rather not.\" I had assumed that this was the way to use Tire.
The grip is so good that you can feel the bite of the tire itself even when descending. \"Deflection\" I also feel
On the other hand, on hard surfaces, the air pressure may be a problem, but I felt that they were unreliable.
You should be very aware of how to use Tire depending on the road surface.
In general, if the road surface is soft, it may be an option, but on the other hand, the Block is very high, so it is very aggressive to the road surface.
As well as the considerations in Course, I think it is a Tire that should not be used on general forest roads or in the mountains.
For mountain fun, Tourist or FIMTire's Enmi would be fine.
View detail
![VXSeriesChain 520VX3 Silver [with Crimp(ZJ)Joint]](https://img.webike-cdn.net/catalogue/images/59741/520VX3_S&S_P_TS.jpg)
Fits: APRILIA AF-1 FUTURA, APRILIA PEGASO, APRILIA PEGASO 2, APRILIA PEGASO 3, APRILIA PEGASO ie, APRILIA PEGASO650 STRADA, APRILIA PEGASO650 TRAIL, APRILIA RS, APRILIA RS, APRILIA RS, APRILIA RS, APRILIA RS EXTREMA, APRILIA RS Sport Production, APRILIA RX SIX DAYS, APRILIA TUAREG RALLY, APRILIA TUONO, APRILIA WIND, bimota YB7, BMW F650, BMW F650 FUNDURO
Compared to OEMChain
Compared to OEMChain, we are satisfied with the durability (2 weeks and 500 km traveled).
I appreciate that STM in Hiratsuka City, Kanagawa Prefecture, who installed the product, was more reasonable than other stores in terms of the replacement labor cost.
I will use it again.
View detail
Fits: APRILIA AF-1 FUTURA, APRILIA PEGASO, APRILIA PEGASO 2, APRILIA PEGASO 3, APRILIA PEGASO ie, APRILIA PEGASO650 STRADA, APRILIA PEGASO650 TRAIL, APRILIA RS, APRILIA RS, APRILIA RS, APRILIA RS, APRILIA RS EXTREMA, APRILIA RS Sport Production, APRILIA RX SIX DAYS, APRILIA TUAREG RALLY, APRILIA TUONO, APRILIA WIND, bimota YB7, BMW F650, BMW F650 FUNDURO
Friends of Chain Shiko
The color of the replaced Chain is VX3 Steel, but during maintenance \"Chain Roundup.\" A Gold Rivet Joint was purchased separately for confirmation.
As for Demerit, the Joint that comes with the Chain is accumulating, should I use it as a Gold chain next?
View detail
![VXSeriesChain 520VX3 Steel [with Clip(FJ)Joint]](https://img.webike-cdn.net/catalogue/images/59741/520VX3_Steel_P.jpg)
Fits: APRILIA AF-1 FUTURA, APRILIA PEGASO, APRILIA PEGASO 2, APRILIA PEGASO 3, APRILIA PEGASO ie, APRILIA PEGASO650 STRADA, APRILIA PEGASO650 TRAIL, APRILIA RS, APRILIA RS, APRILIA RS, APRILIA RS, APRILIA RS EXTREMA, APRILIA RS Sport Production, APRILIA RX SIX DAYS, APRILIA TUAREG RALLY, APRILIA TUONO, APRILIA WIND, bimota YB7, BMW F650, BMW F650 FUNDURO
Easier to use than expected
This is the first time I have used the clip type, and it was very easy to install as it requires fewer tools than the caulking type. I haven't done any long-twisting yet, but so far I have no complaints. I think it is safe because it is made by a reputable manufacturer, but I think it would be safer to use a 0.5mm wire to attach the clip just in case. I am also satisfied with the fact that I was able to buy a DID chain for less than 8,000 yen, which was almost 14,000 yen, because DID chains are sometimes sold at a discount price. The chain is not as strong as the other two, but if you are going to use it in a rough or off-road environment, I would recommend the caulk type. View detail
Fits: APRILIA MX125, APRILIA MX125 Supermoto, APRILIA RX 125, APRILIA RX 125 ENDURO, APRILIA RX 125 SUPERMOTARD, BENELLI 449 CROSS, bimota DBX 1100, BMW 1200 HP2 SPORT, BMW G450 ENDURO, BMW R1200 HP2 ENDURO, BMW R1200 NINE-T, BMW R1200 NINE-T PURE, BMW R1200 NINE-T RACER, BMW R1200 NINE-T SCRAMBLER, BMW R1200 NINE-T URBAN GS, CAGIVA ELEFANT 900, CAGIVA ELEFANT 900, DUCATI 1158 MULTISTRADA V4 PIKES PEAK, DUCATI 1200 MULTISTRADA, DUCATI 1200 MULTISTRADA S
Standard Pad
This pad is one of the custom parts that have become a staple for me. it has a direct feeling of metal touch, and it works hard when breaking before cornering, and it is easy to create a trigger for laying down, and it is also good for leaving the board after dragging and breaking in. It is a metal pad, so there are some attacks and reductions of the motor, but the balance with the motorcycle and my riding style are perfectly suited to these boots. I am satisfied with my purchase. View detail
![SUPER Non-Seal Chain 520DZ2 Gold & Black [with Clip (RJ) Joint]](https://img.webike-cdn.net/catalogue/10626/520dz2_sdh_TS.jpg)
Fits: HONDA CR125, HONDA CR125, HONDA CR125, HONDA CR125, HONDA CR125, HONDA CR125R, HONDA CR250, HONDA CR250, HONDA CRF250R, HONDA CRF250R, HONDA CRF250X, HONDA CRM125, HONDA CRM250R, HONDA MBX125F, HONDA NS125F, HONDA NS125R ITALIA, HONDA NSR125F ITALIA, HONDA NSR125R ITALIA, HONDA NSR150, HONDA RTL250S
good
good View detail
Fits: APRILIA AF-1 FUTURA, APRILIA PEGASO, APRILIA PEGASO 2, APRILIA PEGASO 3, APRILIA PEGASO ie, APRILIA PEGASO650 STRADA, APRILIA PEGASO650 TRAIL, APRILIA RS, APRILIA RS, APRILIA RS, APRILIA RS, APRILIA RS EXTREMA, APRILIA RS Sport Production, APRILIA RX SIX DAYS, APRILIA TUAREG RALLY, APRILIA TUONO, APRILIA WIND, bimota YB7, BMW F650, BMW F650 FUNDURO
역시 DID
위바이크에서 첫 구매하였습니다.
생애 두 번째 오토바이인 혼다 CB500X로 약 20,000km를 주행하였고, 체인 교체시기가 다가왔습니다.
마침 일본 여행을 계획했던 터라, 오프라인 매장에 방문을 했는데 가격 차이가 많이 나더군요.
그래서 한국으로 돌아와 위바이크에서 주문을 했습니다.
CB500X 첫 체인 교체 후, 전국일주도 다녀왔네요.
----------------------------------------------------------
This was my first purchase from WeBike.
I'd driven about 20,000km on my second motorcycle, a Honda CB500X, and it was time to replace the chain.
I was planning a trip to Japan, so I visited a physical store, but the price difference was quite large.
So, I returned to Korea and ordered from WeBike.
After replacing the chain for the first time on my CB500X, I even went on a cross-country trip.
Powered by Google Translator
View detail
Fits: APRILIA AF-1 FUTURA, APRILIA PEGASO, APRILIA PEGASO 2, APRILIA PEGASO 3, APRILIA PEGASO ie, APRILIA PEGASO650 STRADA, APRILIA PEGASO650 TRAIL, APRILIA RS, APRILIA RS, APRILIA RS, APRILIA RS, APRILIA RS EXTREMA, APRILIA RS Sport Production, APRILIA RX SIX DAYS, APRILIA TUAREG RALLY, APRILIA TUONO, APRILIA WIND, bimota YB7, BMW F650, BMW F650 FUNDURO
Good for cheap overall sprocket and chain replacement
About quality and texture: high quality and easy to install About the feeling of use: the bike feels new again Products to buy together: front and rear sprocket Difficulty of installation: Hard Remember to count and buy enough chain for your bike View detail
Fits: GASGAS EC 125, GASGAS EC 200, GASGAS EC 250, GASGAS EC 300, GASGAS EC 450 FSR, GASGAS EC 515 FCR, GASGAS JTX 320, GASGAS MC 250, GASGAS Pampera 125, HONDA CR125R, HONDA CR250R, HONDA CR500R, HONDA CR85, HONDA CRF150F, HONDA CRF150R, HONDA CRF230F, HONDA CRF250R, HONDA CRF250X, HONDA CRF450R, HONDA CRF450X
Easy to install ... and look good. GOOD\"
I was considering bellows Boots but didn't find one I liked, so I chose this one.
It is easy to install, looks good, and is ideal for preventing Inner Tube scratches.
View detail
Fits: APRILIA AF-1 FUTURA, APRILIA PEGASO, APRILIA PEGASO 2, APRILIA PEGASO 3, APRILIA PEGASO ie, APRILIA PEGASO650 STRADA, APRILIA PEGASO650 TRAIL, APRILIA RS, APRILIA RS, APRILIA RS, APRILIA RS, APRILIA RS EXTREMA, APRILIA RS Sport Production, APRILIA RX SIX DAYS, APRILIA TUAREG RALLY, APRILIA TUONO, APRILIA WIND, bimota YB7, BMW F650, BMW F650 FUNDURO
Needed due to Sprocket changes.
I installed it on my Ducati MONSTER S2, which I always use for touring.
The number of pieces in the Chain did not match due to the change in the number of Sprocket pins, so the Chain was cut and re-connected with this Joint.
The DID Kashimaru-kun was used to cut the chain, press-fit the plate, and crimp. While the kashimaru-kun method is the strongest and most reliable, it is also the most time-consuming and labor-intensive.
I am always using Crimp because I am a little worried about the clip type on my large motorcycle.
By the way, Motorcycle, which I always use for forest road touring, uses light pressure & Clip type.
View detail
Fits: APRILIA AF-1 FUTURA, APRILIA PEGASO, APRILIA PEGASO 2, APRILIA PEGASO 3, APRILIA PEGASO ie, APRILIA PEGASO650 STRADA, APRILIA PEGASO650 TRAIL, APRILIA RS, APRILIA RS, APRILIA RS, APRILIA RS, APRILIA RS EXTREMA, APRILIA RS Sport Production, APRILIA RX SIX DAYS, APRILIA TUAREG RALLY, APRILIA TUONO, APRILIA WIND, bimota YB7, BMW F650, BMW F650 FUNDURO
Clip press-fit type is the easiest
I used it on my car, which I always use for touring.
When we changed the Final, we had to cut the Chain and adjust the length.
The Joint itself was in the form of a light press-in, which required the use of a chain tool to press the Plate in.
I thought it would be easy to use with Clip, but please note that tools are required.
However, because of the press fit, I don't think it will come off so easily even if the Clip flies off.
For me, Crimp is a hassle, and I think that light pressure insertion is the best balance.
View detail
Fits: HONDA AX-1, HONDA CR125, HONDA CR125, HONDA CR125, HONDA CR125, HONDA CR125, HONDA CR125R, HONDA CR250, HONDA CR250, HONDA CR500, HONDA CR500, HONDA CRF250 RALLY, HONDA CRF250L, HONDA CRF250M, HONDA CRF250R, HONDA CRF250R, HONDA CRF250X, HONDA CRF450L, HONDA CRF450R, HONDA CRF450R
without a problem
I received the parts with no problems. View detail