Reviews
As a replacement for OEMBlinker relay
I bought a battered 900SS (900SL) and am Restore.
In this situation, RearBlinker decided to change to ultra-small type LED's for various reasons.
The front is a Cowl recessed type, but since this is part of the body design, it is used as is, and the light bulbs inside are not converted to LEDs, but are left as they are.
This would be a hassle with bulbs in the Front and LEDs in the Rear, but times have evolved and there is now ICRelay, which supports a variety of wattages and makes everything look good.
The problem is replacing that ICRelay with the original Relay.
For ordinary Japanese cars, it is a 2-pole universal layout, so all you have to do is plug in the Conversion Connector that comes with the Relay, but unfortunately, DUCATI is a 3-pole Relay.
In addition, the connector is fixed to the body of the car, and the Relay is inserted into it, which is the opposite arrangement from that of domestic cars.
(For domestic cars, the RelayBody is mounted on the car body, and the Connector extending from the Harness is inserted into it.)
So we decided to disconnect and discard the UniversalConnector (Female side) from Relay and make our own Conversion Connector that would be Male-Male.
After carefully checking the terminal shape of the OEMRelay, I realized that it is the same as the H4Headlight Connector.
So I bought this Kit to create H4Connector.
Although there are a variety of female connectors that can be used with H4 Valve, there are only a few that can be used to create male connectors that reproduce the shape of the Valve.:Set is appreciated!
Unfortunately, the H4 and OEMRelay terminals had different widths, although the connector shape was correct.
The OEMRelay terminal width is about 6.4mm, and this H4 terminal is about 7.7mm wide, about 1.3mm thicker, so Quantity:Pair (for Left and Right) was shaved and prepared 0.6mm at a time.
However, the terminals are generated by folding a flat plate 180° with PRESS, so if both ends of the terminal are shaved, the folded part is lost and becomes RoseRose.
To avoid RoseRose, before shaving both ends, solder is poured inside the terminal to fix the PRESSED board firmly in place, and then both ends are shaved...Relay terminal is completed!
The completed terminal has a different width at the insertion point, but the rest of the terminal remains the normal H4 terminal shape, so it can be used by inserting it into an H4Socket as usual.
Just check the terminal positions of ICRelay and OEMRelay (they were in a position relationship that would not function if you stuck them in as they were) and assemble them.
We were able to connect the Relay receiving Connector on the car body side and the replaced ICRelay Connector while converting well.
The terminals included in the Connector set are gold-plated and magnificent, and their shape and strength are quite normal and perfect.
Male of H4Connector. It should be a rare occurrence, but if you are having trouble with HID or LED wiring, this is the perfect solution.
View detail
Just right!
In general maintenance
This amount should be enough.
View detail
Preliminary Fuse
Quantity for spare Fuse:This selling price for 1 Set of 3pcs. is inexpensive, which is helpful. I don't think I will use all of them. View detail
Preliminary Fuse
When I exchanged Main's Harness for Other Brand Product, it was a MINI flat type, so I bought it as a spare.
The price is reasonable and Quantity:1 Set of 3pcs. so I don't think I will use all of them, but it is worth having.
View detail
Connection
It is used for redoing Wiring.
Just Right Quantity:It was just the right number of pieces to reASSY in a set.
View detail
Exchange, Spare
I bought this for replacement installation and spare.:1 Set of 3pcs., affordable and helpful.
How about the quality? I don't know, but I thought it was good since it is Fuse.
View detail
Spare
I seem to have shorted it when replacing Blinker's Relay, so I bought this for a spare.
Quantity:1 Set of 3pcs., The selling price was very reasonable.
View detail
useful
I have purchased it several times and it is very useful to have it on hand for use in small places.
No durability issues.
View detail
Compact
Small, discreet and nice!
Installed on MotorcycleFront CB400T
For securing your Motorcycle during transport!
View detail
Improved serviceability
[How is it used?
TRIAL vehicles are crammed with parts in a small space, and in the case of the ScorpaSY250R, it is not even possible to see the plug without removing the fuel tank, even though plug replacement seems simple at first glance. For this reason, we decided to install this Fuel Joint, which can separate the Fuel Hose with one-touch so that the Fuel Tank can be easily removed.
Was the one you received as per Image?
It looks quite gutsy.
Was the installation difficult?
Technically, it is not difficult, but as you can see in the picture, the length of the Fuel Hose before and after the Joint is very short because it is installed in a narrow space. Fortunately, we were able to install it almost in a straight line.
How was your experience with it?
One-touch allows the Fuel Hose to be separated, which improves serviceability.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
It is functional enough, but it would be nice if it were more Compact. It would be especially nice if the overall length could be shortened.
Other items that would be helpful
Point or hang for installation:When removing the Joint, it is good to prepare Dustcloth because a little Gasoline in the Joint will spill out.
View detail
Just the right size to organize your Wiring.
[How is it used?
I used it to put together Wiring to add DriveRecorder-etc.
I only had the White Tie Band on hand, so I chose this size which was in stock in inconspicuous Black.
Was the one you received as per Image?
To be honest, even if the size is written, I do not know the Image of the size feeling, I chose appropriately, but it was just right. lol.
I thought it would come with a Rubber Band like in the product photo. I thought so, but it was in the bag properly.
How was your experience with it?
It's a normal Tie Band, and it's a good size to organize your wiring.
I'm hoping the fact that it's a weatherproof Type means it'll hold up!
Also, not only this product, but the Tie Band bag is good because if you open it from the side as shown in the picture, it won't come out of the bag.
【Review】
It has a good size and is useful for organizing wirings or anything else.
As it comes in a pack of 100, well, if you are a normal person, I think buying this will be enough.
The Tie Band can be bought even in the 100-yen etc., but it is safe to choose the solid thing which is weatherproof if the price difference is about Juice1 pc anyway.
View detail
Fuel joint
It is easy to remove the hose when setting the carburetor, so you can work smoothly.
It would be better if it was a little more Compact.
View detail
If only I had this!
[How is it used?
I've been using it for about a month now.
Was the one you received as per Image?
It was just like the picture and as Image.
How was your experience with it?
I've lost the one I was originally using, so when I need to clean up a batch of Wiring or
I bought this because I keep it with my in-car tools for use in emergencies.
The price is cheap, and it is very useful because there is no lack of strength because it is cheap.
If you are in a state where you can drive yourself, I think you can get by with a Tie Wrap at worst.
The uses are as diverse as your ingenuity.
Even if you don't do much motorcycle maintenance, I think it's a good idea to keep it in your on-board tools.
[Points to note]
Of course, do not use it around the exhaust system because it is weak against heat.
How did it compare to other products?
I feel like it's more solid than the Webig Garage product.
(We BigGarage's would often break off when tightening)
View detail
SUPER Versatile Items
In addition to binding the wiring, the Hemp palm has many other uses, such as temporary fixing of various parts, fixing the brake lever and pedal during maintenance, etc. The size can be bought at the home center up to 300mm long. I have a lot of them in my garage.
By the way, when the Rear blinker of BuellXb12r was broken by the vibration while touring, I fixed it temporarily with the in-Hemp palm pack which I always have and surpassed it.
View detail
It's not much of a problem to use it.
It's convenient to use it either suspended or flat, but if you're trying to apply enough pressure to send Gasoline to the Carburetor, you'll still have to hang it.
The root that connects the Hose to the Hose will leak, although not in the amount that it is Large if you don't use the Hose Band.
As for a point of complaint, because there is no hole in the Cap, when the cap is closed, Large pressure does not apply, Gasoline does not come down. When you use it, you should make a small hole in the cap with a drill.
I would like to be able to use it with the lid closed for safety reasons.
By the way, the inside diameter of the included Hose was 6mm, which is thin for LargeEngine Displacement Volume cars.
View detail
I have it on hand in my motorcycle at all times.
Motorcycle Side Back and Maintenance.
I bought it to fix the brake lever.
Because it is sturdy and disposable after temporary treatment
It is very useful
There's a toolbox in the car.
I always have about 10 of them in there with the tools.
View detail
Sufficient performance
The other company's product we used before was inexpensive, but lacked strength and accuracy, so we ended up losing money by buying cheap.
This product is not the cheapest by any means, but it is solidly strong and accurate.
I opened one bag and visually checked for defects, but everything was molded tightly and there was nothing that could be called defective.
The LEADTime is short and excellent for wear and tear.
I can recommend it
View detail
Active in a variety of situations
It is very useful for a wide range of applications, mostly for bundling wiring, but it can also be used to lock the front tire on a motorcycle during maintenance. It's a good cosmetic product, and there is enough to go around. View detail
As a hydrationHose joint
I bought this for my Hydration that I use for Endurance for Race.
As for the Hydration itself, you can buy a suitable one for Running or something like that, and if you cut the Hose in the middle and fit it, it becomes a convenient Hose that can be removed.
It is convenient because it can be separated from the leather suit without having to remove the Back attached to the leather suit.
View detail
Thin but strong
Is it thinner and larger than I expected? But when I used it, it was surprisingly solid and never broke or tore off Mm
Often a poorly made Band will get hit by UV rays and become bruised and torn off I've been using it in a hot spot right next to the Engine for a year in the wild and have had no problems
Necessary and sufficient
View detail