Reviews
Thin and easy to use.
I used to use Home center, but this KTC is thin and easy to use. View detail
Easy to use and safe
I have used various Tire Lever and the handle and tip spatula are just right in bend and thickness.
Surprisingly, some large handles can cause palm pain, but this is a safe and easy-to-use product.
View detail
Keep one for now.
Easy to use, Basic and one of a kind Items to have.
It is as easy to use as DRC's heavy Tire Lever, KITACO's regular Tire Lever, and a domestic Tire Lever with a smooth tip whose name I forget.
View detail
Easy to use
The tip is thin and strong and the Grip is easy to hold so it is easy to apply force.
The lever itself is of moderate length and of very high quality, so it can be easily attached and detached from the wheel to the tire.
The quality of the product is Number One.
View detail
KTC Tire Lever
I could not get the tire to fit in the lever made by another company, but it fit easily in this one. What's the difference?
It is the thinness of the spatula part. The thin spatula takes up 1/3 of the total length. That's a good thing.
The more Bead in the Tire, the narrower the Pitch to insert Lever from the remaining 1/3 of the Tire.
I want to insert it right next to the lever I'm holding down, but it's too thick to fit in another company's lever.
Thinness is justice when it comes to tire levers. I think the strength of a manufacturer specializing in tools is that they are able to ensure the strength of their products.
People who change tires by themselves should definitely use this.
View detail
A must-have for Tire replacement.
I have three of them. If you have that many, you can reassemble them without any problem. View detail
KTC is the best choice for Tire Lever
I lost the one that I was using, so I bought it again.Tire lever comes out from various manufacturers, but this one of KTC has good balance in both price and performance. It is thin and the tip is bent to be suitable for tire replacement. If I lose it again, I will buy the same one. Crying 。 View detail
I feel the threshold is not beginner friendly w Is it a tool for PRO?
[How is it used?
Currently in use, rarely used since it only comes into play when Chain is exchanged.
Was the one you received as per Image?
Image is correct. It has a sense of quality and rigidity.
How was your experience with it?
The Grip is easy to hold, the movement of the Outer and InnerBolt is smooth, there is no stress, and the accuracy is high.
Various Product Contents are made into attachments in order to be used for Chain size correspondence, Cut, and Crimp, and it is easy to use the point that the O-ring is attached to the attachment and the dropout prevention measure is given. Moreover, it is devised in the shape that can be checked so that it may not be tightened too much in the press fitting of the joint plate.
When crimping the Link Plate, there is no need to prepare any other tools by using the attached Handlebar, and I like the fact that it suppresses the input of an overly large Torque. This is an excellent tool that has a lot of ingenuity and can cut and crimp reliably.
There are some disappointing points such as the price, the surface coating peels off on the powder and sticks to your hand when you use it for the first time, the instruction manual does not specify the amount of crimp, and only the illustration of the crimp shape and notes are written.
[Points to note]
If you are not sure how much to crimp, we recommend you to check the specified value of ChainManufacturer.
The instruction manual instructed to use 52 press-fit plates for 525 size, but I used 50 press-fit plates (530 size) because I could not use them with DID 525ZVM-X which I replaced this time.
How did it compare to other products?
We compared the DID Chain tool, which has a low price and a good reputation, but we chose a reliable and first-class tool manufacturer because of its ease of use and the fact that the chain is an important security component.
Other items that would be helpful
Opinions and requests to Manufacturer:I would like to see the Crimp amount (diameter) for each Chain size listed in the Instruction Manual or on the web.
View detail
It's an easy lever to put effort into.
The tip is thin and strong and Grip is easy to hold and force. KTC is the best in terms of quality. View detail
Compact and easy to use.
Tire Lever is not long enough. Even if it is short, the angle is good, so it is easy to use the Tire Lever to get power. View detail
Very easy to use tip shape and thinness
This is the easiest to use among these Tire Lever models, along with TSK's
It's one of those things.
I bit a tube when I did Puncture on the road and I couldn't help myself.
I've been there, and I'm not sure how much I would have liked to have this Lever at the time.
I can't tell you how much this means to me.
Quantity as well as for garage use and for carrying tool bags:2pc more
I bought it (laughs).
It may seem like a high price for a Tire Lever, but it's easy to use and
It makes sense when you consider the efficiency of the work.
View detail
The best
I think this and TSK are the twin pillars of the Spoon type Tire Lever... in the middle of the Spoon. There is a step for scratching to prevent Lever from getting too much in when it wakes up. is done. That means it's great for replacing tube tires. Because it induces biting. I think it's a great Lever that has been further imp lubeed after thoroughly researching other products. View detail
The best Tire Lever I've ever had!
First of all, the ease of use is the best compared to the Tire Lever I've had
It was easy to get into the gap between the rims, and when I put the Tire in after it was replaced, it went in without difficulty
I only bought 1 pc as a trial, so next time I order, I'll be able to get more Quantity:I would like to have about 2pc
The one drawback is the high price I don't know if it's cheaper in terms of TotalCost without just canning the tube and making it puncture Okay?
View detail
One of the easiest levers to use
At first we used a cheap Tire Lever from Straight and Daytona etc I was there, but Race's seniors and friends at the supply store
I bought TSK and this KTC Lever after hearing about it from
It is true that the tip is thinner than that of the less expensive competitors, but the strength is also ensured, and this thinness, shape and Grip's Thanks to this, it became easy to work on the Large change
View detail
It is easy to use
I bought this forged Tire Lever because the tip of the Chinese Tire Lever purchased in the jungle broke The thickness and shape of the tip are exquisite and the feeling of use is also good View detail
No complaints, excellent items
? 【What made you decide the purchase?】 It is stated that the tip is thin by imprint. I was looking for a thin and easy to use Lever.
? 【How was it actually used?】 It is considerably thinner than Lever of about 1 to 2000 yen. Moreover, it is strong.. Lever with a thick tip needs to be inserted all the way in, so it is easy to chew Tube, but it is very easy to use.
? [Is there anything I was disappointed about?] Nothing in particular.
? [Request to Manufacturer - Please tell me if there are any improvement points】 Grip is good because black is not so noticeable dirt but Red or Color Grip is good.
? 【Have you compared items?】 There is none
? [Others] We will have a reasonable price, but the Air leaked from the Tire that we built together. Because there are many people using a high Heavy tube because it opens a hole in the Tube. Although it is hard to chew a thick part, if you use this Lever of a thin tip, you can assemble without chewing even with an ordinary cheap Tube. In addition, please correct the hole of Tube and Tube - - If you are an experienced person, I will Recommendation to use. The pair is also comfortable.
View detail
Very easy to use
Until now Tire Lever used the unnamed overseas Manufacturer as if it were the same
This idea was a mistake.
Ease of work is completely different.
Although I might not think about replacing Tire Lever at all, if there is opportunity
We recommend you to replace with Lever.
View detail
Just right Length
Until now (210 mm of KTC) I was exchanging tires only. So, compared to that, 260 mm was much easier to do. However, rather than imagined from the shape of the spoon, it was not easy to enter the rim. (I firmly coated the beat cream) I felt it was okay if the angle of the spoon was a little wider. I can not say exactly because I never used a lever from another company. The grip with the rubber was put on the force without putting a burden on the hands. I used 210 mm for tooling, but I have to buy it and I can not bring it even with 260 mm. It is better than struggling with 210 mm. View detail
This is superb
Repair Parts of the previous MODEL will not appear and it is a substitute.
First of all, it is overwhelmingly different that Plate's press-fitting has become easier.
Former MODEL was difficult because Plate was easy to fall, but the fall with Z guide. Also devised to prevent excessive press fitting.
CutPin which was heavily damaged in the previous MODEL has been changed from the Screw expression to the insertion formula, and the Trouble that breaks from the root is gone.
Crimp pin also changes to a special shape thing, it is devised that it is not too much Crimp.
Anyway it's easy to use. Super Recommendation.
But Neck is price.
Although I am frequently used, there is no problem, but the general one is too expensive to buy.
I would like to lower the price as much as possible, apart from 60 series Parts.
View detail
It's neither good nor bad.
It's Tire Lever so it does not change much with other things, but it did not hurt Rim and it was nice and easy to use.
In addition, Quantity : I think that it is better to buy it with 2pc.
View detail