Reviews
Fits: Others For UniversalScreen
Repair Parts are well stocked.
I had only the Screen, so I purchased only the Repair Parts and was able to install them.
The installation was easy to understand because the Instruction Manual can be downloaded from the website.
The feeling of using it is not a problem with wind pressure, though, as I have used it before,
The Cap of Included Parts:has the BALI in the image, which was prepared with a Cutter Knife and then installed.
The installation points are the Clearance and Angle of the Screen and the Light, which change the appearance of the Motorcycle.
As a request to the manufacturer, we would like to sell only the Spacer, which is attached between the Handlebar and Clamp, as a Single Item.
I was so satisfied that I Repeat both Left SideRight Side.
View detail
Good quality and even fits a 45L top box
I purchased this for a CB400 and I only needed the carrier since I already had a top box. I know the product description said it will fit up to 37L and at first I am a bit afraid to pull the trigger. However, after Webike technical team examined for me and told me thatbit should fit fine. True enough after it arrived, I had it installed and it fits perfectly. Another comment is that 45L is not out of place and looked the part. The 45L is good for touring. Big enough for all my essentials and even some extra space for some light shopping Overall, impressed and pleased with my purchase. I never have to worry about storage anymore. View detail
Mounted on REBEL 1100
I installed it to relieve the coldness of the upper body as much as possible. I temporarily installed it while fine-tuning it by straddling the Rebel in a standing posture, but I had a hard time because the work space around the handlebar was narrow. I found on the web that I had to cut the handlebar riser to avoid hitting the tank, but I was able to install it without cutting the handlebar. It has a good windproof effect even when cruising at 140km/h on the highway. It might be hot in summer. View detail
Fits: HONDA CB400SF, HONDA CB400SUPER BOLDOR, HONDA CB400SF
Firmly looks good, but a little hard to install.
Installed on CB400.
It can be attached without removing the OEM Tandem grip.
The front side is co-tightened to the rear shock, and the carrier side replaces the 1 pc of Tandem grip fixed bolt that comes with the carriers.
The finish is beautiful, and the matte, elegant paint is not noticeable.
The problem is that the bolt did not bite into the screw threads, and it took a lot of time to re-try and re-try. If you have never tinkered with motorcycles before, there is a possibility that you will screw up the grip or ride it with an incomplete installation. On the other hand, if you are skilled enough to replace the oil, you should be able to manage. The Torque and order of work are all written in the Instruction Manual, so there is no need to worry.
The box bracket is small enough to fit almost any size, but too small to be used as a carrier. However, it is too small to be used as a carrier.
View detail
Genuine Givi Metal Rack [E120B]
A customer has had one of these fitting kits before although they did have the E120 and not this smaller B model. Due to a small accident, it did get a bit knocked out of shape. They asked if I could source a replacement and I first thought of Webike. This kit was actually in stock at the time and so this was added to my basket. With a coupld of other parts, my order was shipped using EMS and delivered in 5 days from shipping. The kit came well packaged and no damage during transit. The kit is really wasy to fit and as they already had the required drill holes already in plce, this was a simple replace and go. The rack is a well made part and the welds were all nice and clean. The painted finish was smooth throughout and looks a peach. This does add that bit of extra carry on space even thought the case holds a lot too. A must if you do short trips and need that bit of extra room on top. Very happy customer, thanks Webike. View detail
Fits: SUZUKI SKYWAVE650 burgmanLX, SUZUKI SKYWAVE650 burgmanLX, SUZUKI SKYWAVE650 burgmanLX, SUZUKI SKYWAVE650 burgmanLX, SUZUKI SKYWAVE650 burgmanLX, SUZUKI SKYWAVE650 burgmanLX, SUZUKI SKYWAVE650 burgmanLX
Larger than OEMScreen
It is very cheap than buying from OEM, and the sides are sized up to the equivalent of a Knuckle guard.
It is larger than OEMScreen.
Unfortunately, the thickness of the product is thinner than the OEM, but the strength of the product is smaller than the OEM, so the product may flex at high speeds,
Wound is more likely to be attached compared to OEM due to the difference in material.
View detail
Practical or Dress-up
I had difficulty with the installation because I felt like I didn't explain it well enough.
I thought that the Size might not have been produced by manufacturing, but if I calmly aligned the Screw holes, it was perfect.
I think NORMAL is good because it makes the cooler box look like a cooler box, but a little Wilde.
I don't have any practical use for it.
If it were $2,000 cheaper, it would be 5 stars.
View detail
Smooth transaction
Packaging is secure and item have been received well.The seller is good and respond with my inquiries when I want to change my email. Part definitely original one. Will purchase another item next time. Thank you ! View detail
I appreciate the size and the Brown.
Universal Product, so it has a high degree of freedom of installation. It has a good large size and brown color. [Color] The Smoke level is also exquisite, providing protection from the driving wind without interfering with visibility.
The product was exactly what I expected
View detail
Genuine Givi Small Universal Screen fitted to XSR900
I was going to go for a different make but have read a lot of great reviews for this one. The Givi Small Universal Screen. A brand I have not had much dealings with but a few customers have had these brand of screens. They are reasonably priced and the fitment is perfect with what I have read. With a few other items in my basket and this screen meant that the shipping was really good value because if you have a few smaller parts this cuts down on shipping individually.Some of the other parts were always going to be an issue in case they scratched the screen. Webike think of all this and pack your items accordingly. The screen was packed in a loveley thick bubble wrap and taped closed. The rest of the parts in my order were all padded and therefore, no damage could occur during transit. Webike even tape theentire box closed. EMS fast service is what I chose, the cost was so good and all my items were delviered in 5 days.The screen arrived with me in perfect condition and I am not surprised by the amount of bubble wrap that was surrounding it. The screen has a bit of flex which of course yo need, all the bolts and fixings are present and I used these to affix to the XSR900 I had sat in teh garage. It did take a little modding but eventually fitted. It really is a lovely retro looking screen which is what I was aiming for anyway. Not really much else to say about it until I actually take a ride out but the smoke colour does add a nice touch to the whole look of the bike now. All together, I am very pleased with how it looks and how it all went together. Not a tough job for anyone. So, thank you Webike for the great services. View detail
Fits: Others OBK58/42 : V56 : TRK52 : V46 : TRK46/33 : B33NMK : V47 : V40 : B47 : E470 : E450 : B37 : E370 : E350 : E340 : B33NML : E300N2 : E260 : E230 : OBK48/37 : V35 : B27N : B360 : E250
for Replacement
I used to buy a GIVI 45LiterBox and used it for years, but one day the key suddenly stopped turning. After using it for a while, it stopped closing at all, so I decided to replace it.
I was worried because I did not know how to replace it, but I saw a video manual on DAYTONA's site before I purchased it that showed how to replace it, so I decided I could do it myself.
If you are anxious, it may be a good idea to watch the video manual in advance before purchasing the product, because you can actually replace the product by following the manual video.
View detail
Simple construction
[How is it used?
Used to install a GIVI Box.
Was the one you received as per Image?
The Pipe diameter was thick and strong enough, just like the Image.
How was your experience with it?
GIVIMono-lock basePlate was also fixed firmly and was simple and well made.
[Points to note]
Quantity:Pair (for Left and Right) The two symmetrical parts were aligned at the back center and bolt-tightened.
The screw holes on the tire house side were a little difficult to align, so we installed it by picking up the four screw holes little by little.
How did it compare to other products?
No comparison was made.
▼Other than that... I tried to install KIJIMA's back support item number:210-4963.
The Shock absorber side of the OEM Carrier has a thin wall on the inside of the Shock, while the Shock absorber side of the OEM Carrier has a thin wall on the outside of the Shock.
The GIVI rack is thick-walled, and the thick flat washer on top of the Shock is removed and tightened with a cap nut.
The thickness of the plate on the Cap Nut side of KIJIMA's back support eliminates the screw space for the Cap Nut to stop.
It could not be installed.
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA CROSSCUB110, HONDA CROSS CUB50, HONDA CROSSCUB110
If you want to put a GIVI box on a SUPER CUB, install it at the same timeRecommendation
Many people seem to be struggling with the loading position of the GIVI box on the CUB, as it seems to be much closer to the back.
Knowing such a voice, DAYTONA prepared the donpipe parts, so we purchased them along with the box.
I didn't see JA44 listed in DAYTONA's compatibility chart, but my car body (JA44 Latter term) I was able to install it without any problems on the
Installation is as simple as tightening the bolt at the top of the rear suspension, and even amateurs with tools should have no problem installing it.
The key loading position also fits in a good place on Balance, and we have no complaints.
However, when I went to a wooded area after installation, the box and my buttocks often hit each other when driving in Standing, so it might have been better to move it a little closer to the back……w
It would be nice to be able to adjust the box back and forth a bit with the location of the mounting holes on the Base of the box.
View detail
Fits: Others OBK58/42 : V56 : TRK52 : V46 : TRK46/33 : B33NMK : V47 : V40 : B47 : E470 : E450 : B37 : E370 : E350 : E340 : B33NML : E300N2 : E260 : E230 : OBK48/37 : V35 : B27N : B360 : E250
Quantity neatly:Set possible
I was in-locked at a SA on the highway, destroyed the Key at a Service station, and purchased it.
Replacement work is not that difficult.
View detail
Fits: HONDA Forza 250, HONDA CB300R, HONDA FORZA300, HONDA Forza350, HONDA Forza350
Rack for attaching Monokey base to MF17
I purchased this product for the purpose of installing a GIVI M7 FZSeries Monokey base 91332 on a FORZA MF17.
The installation itself is very easy and takes only a few minutes. However, the M7Base and the holes were not aligned, and the rack had to be modified by force to align the holes. I was surprised that the steel of the rack was quite soft and bent easily, but I managed to install it.
View detail
Used for GIVI E21
GIVI's E21 key was damaged and was replaced.
I was worried about whether I could use it or not because the product description only said "Universal", but I had no problem.
It worked. Although there is an inner groove Key set Z1565T for keys with E21 listed in the compatible MODEL,
3pcsQuantity:Set is not set, so it is more expensive. I think this product is sufficient.
View detail
Many Parts (Screw/Screwetc.)!
I had no choice but to buy it in order to install GIVI's TOPCASE, but I haven't installed it yet because of the number of screws and other parts. I would like to install it before Camping touring in the fall, but the rigidity of the case is so strong that it may be too large to install.
I used to tinker with various motorcycles, but that was as a student when I had time. Now I'm so busy, I don't know what to do...
View detail
Fits: YAMAHA YZF-R25, YAMAHA MT-25, YAMAHA MT-25, YAMAHA MT-03, YAMAHA YZF-R3, YAMAHA MT03, YAMAHA YZF-R3, YAMAHA MT03, YAMAHA YZF-R3
Use with Fender Eliminator Kit
[How is it used?
I purchased this product to install GIVI's Top case on my MT-25 which I use for long trips and shopping.
There are many options for carriers, but we chose this product because we wanted to attach a GIVI Case and were a little concerned about the strength of the Grab Bar alone.
Was the one you received as per Image?
Bolt and Bracketetc. were included as shown in the pictures without any shortage.
Was the installation difficult?
It takes considerably longer to install than the Carrier with Grab Bar installation.
There is an installation instruction manual, but the Large section is explained in letters, so it was very difficult to understand MinusPoint.
Also, although the kit is not designed to be used in conjunction with the Fender Eliminator Kit, it was possible to install it in conjunction with DAYTONA's Fender Eliminator Kit at my own risk.
There is no interference with the Blinker, although it is necessary to place a 3mm spacer between this product and the Fender Eliminator Kit.
How was your experience with it?
The Tandem Footpeg and the Fender section are fixed in 6 places in total, so they are fixed quite firm.
It is quite stable, with no interference with the vehicle body or chatter.
It made shopping more convenient.
However, due to the fact that it is fixed with a Tandem Footpeg, KIJIMA's Helmet Holder cannot be used together.
[Included Parts:were they on?
All necessary items other than tools such as mounting Bolt, Nut, Bracket, etc. are included in the package.
[Was there anything that disappointed you?
As I mentioned above, the installation instructions are very confusing.
It is not enough to have a diagram like an assembled piece of furniture, even if it is explained in words....
In addition, the size of the cap to be attached to the bolt on the SIDE was not correct, so it was necessary to file it down to a size that would fit.
【Review】
Firmly fixed to the vehicle body, it makes shopping and other activities very convenient.
The holes were well aligned and there was no need for any special modifications afterward.
I would like to see a little more work done on the instructions, as the product was good.
View detail
Givi special brackets for Yamaha MT09 Tracer
As we now have the tank bag kit attached to bothe the MT09 Tracer and the MT10. I thought it would be a good idea to get the bracket kit for my wife's MT09 Tracer so she can also have the top box attached too. Never really used this top box on the MT09 Tracer as we didn't have the right brackets. We were sold the wrong ones when we bought the storage boxes. Anyway, after doing some research, I found the dcorrect bracket kit which would mean the MT09 could accommodate the top box. Really easy to find when you go on to Gvi website. Funnily enough, Webike had this kit too at a great price. Why not just get the kit from here, no brainer. I was surprised at how cost effective the shipping was. Mind you, I do always have other items in my basket ready to go to checkout. This meant, the shipping cost, EMS fast service in this case, was really good value. All was delivered successfully in 5 days flat, no messing around with EMS fast. The outer box was taped close which I am happy about as I did not want any of my ordered parts escaping the box during transit. Now bare in mind, this kit box is not small and I was concerned it could damage the other contents of the order. No way, not after Webike warehouse do thier stuff. All the empty space in the box was filled with bubble wrap and all was neatly packed out and no chance of any movement in transit. No dramas there. The kit is really nice, it came with all the instructions you would need, it was not too difficult to understand unlike some intructions I have come across before. After a couple of minor hitches, using the wrong bolt, it eventually went on great. The brackets are nice and sturdy once fitted, the finish of the brackets is pretty good. Hopefully the paint will last a long time. Obviously, this needs to withstand some punishment as it will be open to the UK elements and also the debris from the road surface. All in all, very pleased with this purchase. We both can now pack up our stuff and head out on a few more trips and not have to worry about not having the right equipment with us. It all fits in the storage we now have. Thank you Webike, great job guys View detail
sturdy shelf
My motorcycle is YAMAHA TMAX560. I am going to install a tail box on this motorcycle to increase the loading capacity of the items. The shelf design of this GIVI is very reasonable, the installation holes are precise, and the multiple points of support allow me to equip larger The tail box of the car has many installation accessories, it is recommended to go to a professional car dealer for installation. -------------------------------------------------- -------- My motorcycle is YAMAHA Tmax560. I am going to install the tail box for this motorcycle to increase the loading capacity of items. This GIVI shelf design is very reasonable, the installation is accurate. There are many installation accessories in the tail box. It is recommended to go to a professional car dealer for installation. Powered by Google Translator View detail