Reviews
I wanted to know about Size before I bought it.
CE47ADDRESS110 is neither DOHC nor 4Valve, but SEA BASS GlobalSite says that OilDrain hall is same as GSX-R. I also heard that Engine is Long stroke and ManufacturerOEMHigh CamshaftSpec. I also heard that the engine is long stroke and ManufacturerOEMHigh CamshaftSpec. I bought this car thinking that I can call it GSX-R. However, the side cowl of my Address is slightly short of space and there is no other space to put it. I am having trouble finding a place to put it because my car is a Honda, so it would not be stylish and I have no place to put it. I inquired about the size before I bought it, but they didn't tell me. They should have measured it for me since they had it in stock. Webig is very unfriendly.
I will write Size for future buyers. The largest size is 215mm wide and 85mm high.
View detail
Finally arrived!
I tried to imitate the MotoGP Grip Pads that are attached to the Machine instead of Grip Pads.
I was satisfied with the increased SEA BASS degree.
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
Quintessential OEM Product
It is an OEM Product, and is therefore, ExactlySize. View detail
As expected
As it is an OEMAttachment, it fits into the Tank EXACTLY.
It is a solid material and was easy to apply.
It is quite Large, so it is good for protecting a wide area.
I think it's a bit pricey, but I like it, including the design and texture ^ ^.
View detail
Fits: SUZUKI GSX-S1000F, SUZUKI GSX-S1000
Excellent durability if degreased thoroughly.
This is an OEMOption from SEA BASS North America, and as expected, the OEM is outstanding in fittings and durability. As long as it is degreased well, it will not peel off. I have not had a good impression of this kind of upholstery, but this is a good recommendation. View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
Carbon heel guard
The texture of Carbon is fair to good, and I would recommend it as it seems to prevent scratches caused by Boots. View detail
Fits: SUZUKI Hayabusa, SUZUKI GW250, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSX-R1000
Tank capDecal
I like the design of the Decal. View detail
Just fit!
Just fit and just the right size!
The surface has a textured feel, which is quite similar to an Adventure Motorcycle.
It is soft, so it was easy to apply even on curved parts.
View detail
S Emblem!
I bought a Tank capDecal from SEA BASSOEM in North America before and it was good, so I bought a Tank capDecal from the same SEA BASS in North America. "S" Purchase Emblem.
GSX-S also has SEmblem, but I thought that SUZUKI's Emblem should be Red…, so I changed it.
I was wondering what the size would be like, but it is the same size as the Silver SEmblem on my Defferential Gearォ! The color has been changed to my liking.
It looks good with Red as a color scheme.
View detail
Identity mass.
I wanted a limited edition Helmet from Team Equestar, but I can't afford it because it costs 130,000 (lol).
But as a SEA BASS fan and GSX rider, I want to give it an identity.
I thought about OEM GSXSticker, but it was too small. The SEA BASS is a large size, so I put it on the back of the helmet to make it stand out.
good point
Although it is a large size, it is just the right size for the back of a helmet.
Parenthesis is simply good.
Unlike the deCurl type of FOR JAPAN MODEL, there is no protective seal, making it easy to apply.
A bad point
To paste on curved surfaces, it is necessary to use a water paste→dryer to slowly extend the wrinkle.
I think it is a good parenthesis to put a lot of small Stickers with good sense, and for those who are lazy like me, I think it is also interesting to put a lot of large Stickers with a lot of sense. Please try to make your own original helmet.
View detail
Good quality!
Simple SEA BASS DesignSticker.
I was looking for a FOR JAPAN MODEL OEM to put on my helmet, but I couldn't find a good one in FOR JAPAN MODEL;
I bought this one because I could find a North American SEA BASS one!
fair weather
It is 15 cm long, so it fits EXACTLY on the back of the Helmet.
Design that never gets old.
Sticker type is easy to apply.
A bad point
The production is a little bit messy.
I think it can be used for the body of a car, but I think that using it for a helmet is more suitable for its large size and other features.
The simpler the design of the helmet, the better it will look.
View detail
Not recommended for purchase
First and foremost, the printing is crappy!
Did you get a suspicious Chinese product? but it is made by FactoryEffex (United States Sales Spec.?) It is
I bought this product because it is different from others and cosmetically better, but it is a disappointment.
We strongly recommend you to buy ZETA or Renthal.
View detail
Red Emblem
Fits on even the slightest curved surface, and the adhesive is strong enough not to peel off, making it stand out against the black body. View detail
They're not the same color
The color is different between the picture and the real thing. 。 Red color in the picture. The real thing is Orange. View detail
Fits: SUZUKI Hayabusa, SUZUKI GW250, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSX-R1000
Great quality!
I installed it on my 08GSX1300R HAYABUSA.
Combined with Dura Bolt.
There are many kinds of CapDecal, but the thickness and texture are as good as OEMOption products.
I was very satisfied with the product.
View detail
Fits: SUZUKI Hayabusa, SUZUKI GW250, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSX-R1000
Fuel cap
I think it looks good from a distance and was easy to put up. The mark of SEA BASS is Accent and I think it is very good. View detail
Fits: SUZUKI Hayabusa, SUZUKI GW250, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSX-R1000
It's pretty obvious!
I also like the raised carbon and the red letters on the logo of OEMSEA BASS.
USSEA BASSOEM, so the Size is Exactly! Just degrease and apply, so anyone can do it easily.
It's a surprisingly visible spot, especially when you're driving yourself, so if you're looking for that Custom look, this is it!
View detail
I'm self-satisfied.
I was wondering if it was over 3,000 yen, but Quantity:I was happy because it was 1 Set of 2pcs. (laughs).
I replaced the normal color Emblem of GSX-R125 with RedEmblem, but the largeness was different.
The size is a little large, but it is surprisingly large and strong.
View detail
Rare USSEA BASS ITEMS!
This is an OEMAttachment for the USSEA BASS, which is not often seen in Japan. We recommend this for those of you who are not satisfied with a normal tank pad. Just stick it on! View detail
Fits: SUZUKI GSX-R1000, SUZUKI GSX-S1000, SUZUKI GSX-S1000 F, SUZUKI GSX-S750, SUZUKI KATANA, SUZUKI SV650, SUZUKI V-Strom 1000, SUZUKI V-Strom 1050, SUZUKI V-Strom 650
Not bad (^^)
I'm very happy with my order.:Carbon Style, good design, easy to apply and I love it. View detail