Reviews
It works fine!
[How is it used?
I replaced the tank cap with a one-touch type tank cap so that I can refuel the SPIDI when refueling the NSR250etc.
Was the one you received as per Image?
Some other impressions are nowhere near as good, but the one I purchased was not bad in quality and was perfect in terms of accuracy.
Was the installation difficult?
I was able to install it with Bolt On with Bolt.
The diameter will be 115mm Tank cap.
How was your experience with it?
It is easy to attach and detach with the One-touch when refueling, but the refueling port has to be put down once, which has its advantages and disadvantages.
[Included Parts:were they on?
Packing and Material:Stainless Steel Screws are included.
[Was there anything that disappointed you?
None in particular. It seems to be a bit risky as it seems to be hit or miss.
I would like to make it common for all manufacturers. I would like to see this standardized.
View detail
Poorly maintained in close proximity:、、、、
Ballast broke down and White by until delivery.
I was so concerned, I was commuting to work on an alleyway.
Thank you for the earlier-than-expected arrival. (_ _) m
View detail
Used on NSR250R Racer
It is very good and easy to key less. I think the price is lower than other companies' products.
However, fuel may leak if the vehicle body is tipped over.
Note that in Race, Cap changes may require filling the Tank with explosion-proof material.
View detail
Cheaper than purity, solid Tank cap
Since the OEM Product for NSR250R costs about 20,000 yen, we purchased this one for Circuit Running.
Gasoline does not leak and is well made. It is also good that the Tank can be opened with one hand without using a key.
View detail
It's easy not to need a key.
When I was looking for a key less tank cap, I found a cheaper one, but I was worried about the quality, so I bought this one. This is a great product. (2NX) I used it on my SRX and was able to install it with the included Hexagon Bolt and Rubber buffer. I was worried because I had seen some information on the net that the length of the bolt was not suitable for other models or that the rubber had to be modified, but the SRX was large and strong. The only thing is that if you don't store it in a garage, it might be stolen by gasoline thieves, so you might want to think about that carefully. Also, I don't know what will happen if it rains or something. View detail
Fits: KAWASAKI ZX-12R
Just fit in your own hand?
The Normal clutchLever of ZX-12R is very far, so it was a source of stress for me with small hands. The lever shape of this product is curved like large, so I can reach my fingers. Now I can get the feeling of operation I had in mind!
It is important to note that Clutch operates on the finger Quantity:People who do it with 2pc are incompatible.Due to the curvature of Lever the fingersQuantity:With 2pc operation, you can't grip it between your remaining fingers, and you can only half-clutch it. When you are driving, you can still change the shift, but when you are waiting at a traffic light, you have to hold it with 4 fingers until the end to break the clutch. I don't mind because I operate it with four fingers originally, but Quantity:If you're used to using 2pc fingers, you might feel it's Stressed.
View detail
Fits: KAWASAKI ZRX400II, KAWASAKI ZRX400
lock-essential
I like Parenthesis because you don't need a key to refuel! View detail
Easy to refuel
I bought this product because of NSR-MC28, and I thought the key was troublesome when refueling.
I'm satisfied because I don't have to worry about refueling.
However, since the mouth becomes narrow, it is difficult to check the amount when refueling.
Of course, since there is no key, you need to make sure that you are not pranked.
Also, the Bolt that came with it was too short, so I prepared it separately.
View detail
Fits: HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR
If you like.
It is installed to NSR250R.
It's nice that it's easy to remove without a key, but I thought it was a product of different tastes.
Is the back packing vulnerable to Gasoline? Deformed and melted when removed? It was like.
View detail
The power supply branch for the fog.
One Side was open because of the Single Light Durable Cowl on it.
I bought this one because it's Single Light and I wanted to put a fog on it.
It's convenient because it can be taken directly from Coupler.
View detail
Fits: HONDA CBR900RRFire blade
It's not so simple
As the color is the only choice of Black, the dress-up effect is small, but it is the meat of the weight reduction The texture is perfect, with no corners cut, such as
The feel of the controls is solid and the Touch is more rigid than the OEMLever
View detail
Fits: HONDA CBR900RRFire blade
Purchased at the same time as the brake lever
It's the only Black choice, so it's not as flashy, but the texture and feel is better than the OEM
However, the Clutch is gripped, so without Gloves, the LeverReverse side When the corner of the Small finger or ring finger hits the Small finger, it hurts a bit
View detail
ideal
I used to use a SOLAM55w6000k, but I had a more pure white one I bought it because I wanted it
I am satisfied with the bright white color as expected
I was worried about how it would be at night because I prioritized 8000k for fashion, but it was a bit more I think it's brighter now (Lol)
I don't know about the rainy weather, but I'm more comfortable on the highway at night than before
I've been using it for a few months and there is no Trouble
The old one didn't light up or anything, so I'm glad I changed it
Best of all, it's this performance for about 1/10th of the Gold amount, so it's a great cosmetic!
View detail
Fits: HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR
Are they conforming properly?
Carbon Style's Tank cap has deteriorated and comes off, so Material : I bought Cap of Aluminum.
Appearance Design ? Reasons why prices were cheaper than other companies.
It's hot when it's hot and it does not touch with bare hands.
Bundled Packing is thick, and the attached Bolt can not be installed short.
Even if I use alternative Bolt 4 M dish Bolt does not sell long legs.
Cut the Rubber board of half thickness unavoidably
My own packing.
Although I could barely install it,
Parenthesis is bad at a state where it falls dented slightly below the tank surface.
Packing too thick for our bad dish Bolt.
I can hardly imagine that we are conforming to the vehicle properly.
We do not want to sell only with the general adaptation that Universal will work if it is a conventional Exclusive HONDA Motorcycle Tank cap.
Manufacturer's correspondence is not good either.
No reply from Wei Big !!!
View detail
I'm very impressed
Ordering this I was apprehensive about the quality of this product, because it was so cheap, I had my doubts...But Boy was I wrong, The machining is very neat leaving a very smooth finish, The mechanism is very tight and smooth, coupled with a quality, vibrant anodization, I could not be happier. Very VERY nice product and I will be purchasing more in the near future. View detail
Dissatisfied, Cospa OK
There is no dissatisfaction.
Cost pa is also not bad.
Although it is about installation, I think that it can be completed without problems if it is a person who can do Wiring processing.
Since I do not want to change Headlight, it was an LED or HID, but Case was small, so if it is an LED, since the heat sink does not enter, it is purchased for HID conversion.
The price was also cheap and the reputation was not bad,
Although I used impressions, Size was just right better than I thought.
Ballast's Size is also a good feeling, not being conspicuous without tearing Large.
The amount of light is brighter than I thought, the visibility has improved dramatically.
Honestly the power consumption does not change until then. It is a degree of feeling
View detail
It is Style..
As I think that it will not be the case that this product will be needed in the real sense, as a style.
Making is solid and you can fine-tune it.
A little may become Guard around Handlebar even when falling down.
Lever When adjusting the distance, you need to loosen the Screw of Lever Guard, but since there is not much to adjust the Lever distance,.
View detail
Anyway for 2 years without any problem
【What made you decide the purchase?】
I also thought about Absolute and PIAA, but it is five LeverLight for 50,000 or so
Cheap Chinese made in Yahoo auction etc. are often sold and Kore is also made in China, but the difference is the place that inspects and compensates in Japan
Since Impre of other people also have a high evaluation, we purchase this
【How was it actually used?】
I put HID only in Lo, but it is as bright as not needing Hi
Be careful as front runners and oncoming vehicles will be dazzled if the rear axle is not tightened accordingly
【Mounting was difficult?】
It is relatively easy to decide the position of Burner or Igniter beforehand
【Please tell me the installation point and hang】
Let's make adjustments as the optical axis is absolutely mad
If you become a traffic Trouble you can not hit your eyes if it is still not an accident
[Is there anything I was disappointed about?]
I thought I was solidly fired but cloudy appeared inside the Headlight after installation
【Hope for Manufacturer - Please let me know if you have any improvement points]
I thought that the way you have to have the Relay harness already sold separately is Large changeable
【Have you compared items?】
Absolute
PIAA
However it is too expensive...
[Others]
It's 8000k, but if you put it higher than that, it will only get dark by dazzling Blue.... Be supposed to
View detail
It purchased together with the HID Kit. Although the attachment itself is not difficult and I think also efficiently that it is satisfactory, it is regrettable that it is an option .. It seems that it will come out of the object of a guarantee if the rela
It purchased together with the HID Kit. Although the attachment itself is not difficult and I think also efficiently that it is satisfactory, it is regrettable that it is an option .. It seems that it will come out of the object of a guarantee if the relay here is not attached when attaching a HID Kit. View detail
Although 4300 Kelvins were used from the original manufacturer's product, from an original manufacturer's product, it has recognized having become quite bright. Also as [ this ], although it was satisfactory, interest appeared in 6000 Kelvins and it exch
Although 4300 Kelvins were used from the original manufacturer's product, from an original manufacturer's product, it has recognized having become quite bright. Also as [ this ], although it was satisfactory, interest appeared in 6000 Kelvins and it exchanged for it. Furthermore, the run at night became comfortable and carried out. A Cost performance is also good, and is dramatically pleasing, and a surrounding reputation is also high. View detail