Reviews
Smartphone Holder KaEdia
This Holder can be easily attached with the included Hexagonal Wrench. It has an Attachment for any Motorcycle. It is very easy to operate and you can fix and remove the phone with one hand. I am very satisfied with it. View detail
Convenient to carry Helmet
[How is it used?
Helmet attached to Carrier.
How was your experience with it?
Large is better for touring net. For camping, it may be too small or too small.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
perfectly (suited)
Just the right Size...TSR's products are well thought out. View detail
Purchased due to malfunction
It has been about 2 years since I purchased Income. I bought it to try it out because I was the only one who was having trouble with Noise when I was using it.
I was hoping that it was not a malfunction of the Body, but when I tried to use it, I was able to hear it properly.
I think the cause of the failure is that Helmet was used with the speaker left inside even when Income is not in use. Considering the heat during the summer, it may have been a state of considerable overuse.
So you might want to leave it off when not in use.
View detail
Fits: HONDA CBR1000RR FIRE BLADE, HONDA CBR1100XX SUPERBLACKBIRD
Suitable for Separate Handlebars
I purchased this for a new installation of SENA's MESHAntennas. I re-installed the Antennas on the Multi Bar that previously had the Smartphone Holder and the Smartphone Holder on BPYamato's AluminumMount Bar. It is a product for CBRetc. SS. View detail
A more well thought out Size than the usual same product.
As expected of a TSR product, the size is a little small. I have nothing to complain about it.
Just fit the Reserve tank on the front brake.
The following is a comparison of the size of the two. Compare with normal Size.
View detail
Easy to use
The rear wheels can be used without difficulty, but the front wheels cannot be used. The front wheels are gradually shifting, perhaps because they are stuck in place. View detail
Very good.
Motard bikes do not have space to store the body, and I was concerned about the large size of the body. I chose this model because the body is small and the connecting cable is SMART and thin.
I was very anxious about the purchase, but I was able to install it without any problems, and I am glad that I was able to use the included double-sided tape and tie wrap instead of using a bracket.
View detail
Protection Seat
If you are going to buy SeatBack, you may know that the first thing you should do is to copy the protective Seat pattern.
It would be good, if the Tail cowl is damaged, etc., and you need to replace or
When applying the protective Seat from the beginning, it may fail.
For your reference, here are some photos.
View detail
Glad I bought it.
I was taken by Evens and had to give up on it because it was not sold in my neighborhood.
After more than 6 months, I suddenly remembered and looked for it and bought it. I am glad it was in stock.
View detail
Fits: YAMAHA YZF-R25, SUZUKI Hayabusa, SUZUKI GSX-S750, SUZUKI SV650X, SUZUKI Gixxer 250, SUZUKI V-STROM250, KAWASAKI Z900RS, KAWASAKI ZX-10RR, KAWASAKI Z650, KAWASAKI Ninja250, KAWASAKI W800, YAMAHA YZF-R3, YAMAHA Tenere700, YAMAHA XSR700, YAMAHA SR400, YAMAHA TRACER900, HONDA rebel1100, HONDA VFR800F, HONDA CB1100, HONDA CRF250 RALLY
Essentials for Overnight Touring
Lost my HalfCover that I used for 6 years last year on a touring trip, and purchased this product because the previous one, a necessity in case of open-air touring, was discontinued.
As I had expected, I will use it without the Pannier case, although the width of the Rear is not enough for Shinobu Sen with the Pannier case attached.
The half has a string fastener at the center and a quantity fastener closer to the rear.:Pair (for Left and Right) It has a D-ring in one place. I think you need to prepare a clasp.
The fabric is thin, lightweight, and easy to handle.
View detail
Band for installation is too sturdy. (Large sweat)
The mounting band is too sturdy, very stiff. (Large sweat)
Too thick to bend.
The width is a little large compared to the buckle.
Backs require a lot of effort to attach and remove and do not look good.
After much deliberation, we decided to DIY the Mounting Hardware.
The Bag itself is durable and functional!
View detail
Purchased to better understand my car.
As expected, I cannot do the work up to engine overhaul, but it is useful for daily inspections.
It's a great read.
I was a little surprised that the current Service manual didn't explain it with pictures, but I guess Illustration is easier to read.
View detail
I bought it.
I bought it but haven't used it three times, only to go shopping for curry and dumplings. It is not a very large bag, so it can only hold about one or two days and nights. It is faster to bring Single Seat and replace it when you remove the Back. View detail
If you don't want to wear it with others.
The design and quality are perfect. The price is cheaper than brembo, so I like the Large change. I will buy again when it gets worn out again. View detail
Nice detail but good ??
I like it because it's easy to dress up and immeChain ??
However, it sometimes hurts that most of the colors are out of stock….
View detail
Price difference several times. Dozens of times more durable.
[How is it used?
? Continuous use from December 12, 2015 to as of April 13, 2024
100% outdoor use (no roof, with Motorcycle Cover)
Vehicles used:YZF-R25, YZF-R6
How was your experience with it?
The lock is as heavy as it looks, sturdy and secure.
Compared to YAMAHA's Steel links, the durability of the Sleeve is much higher.
I feel that the durability is improved because the sleeve is strong and the chain, which is the body part of the lock, is not exposed.
The rubber part of the product is in a bad shape after more than 8 years of use, but this does not bother us because the rubber accounts for only a small percentage of the product.
It feels like a pure chain covered with a sleeve, and while it can be moved freely enough to aim at the ground right next to where it was lifted, if you are not careful, it will unintentionally come into contact with the Wheel when you put it through it.
While it is heavy and secure, I am concerned about the load on the Spoke section, even though I know that it is better to float the Chain lock for security purposes.
Although the price is higher than the typical chain locks and locks sold at home centers, we would like to believe that the thickness and sturdiness of the locks are also higher, so the priority of being targeted is likely to be lower.
[Points to note]
I think there was a sentence like "easy to carry", but maybe something is wrong.
When loaded on a human being, it is so heavy that his shoulders and back might be destroyed in a second.
When loaded on the Motorcycle side, it is different from a chain lock like YAMAHA or GOJIRA, whose shape is fixed to some extent, and it is likely to move freely, so that the weight is usually on the One Side.
How did it compare to other products?
Y's Gear YL-02 Steel links lock (https://www.webike.net/sd/24118556/)
The Y's Gear is the same chain lock, but unlike this product, it does not bend freely, and it is easier to avoid spikes when putting it through the wheel.
The security of the key to open the door is better with Wave Key's Y's Gear.
The large size of the key to open the lock is smaller than the small size of this product, making it easier to carry.
The Sleeve has not so far experienced any powder clinging to the vehicle due to the raggedness of the Sleeve, and it certainly has the heft, security, and durability for the price. I'd like to use it for a little more peace of mind"than the average. I can recommend this product to such people.
View detail
Fits: SUZUKI DL1000 V-STROM1050XT, SUZUKI DL1000 V-STROM1050, SUZUKI GSX-8S
There is a mistake in the instruction manual
As others have mentioned, the parts for the connection to the tank are not installed, and I have to drill a hole in the back with a drill and screw it in place myself. The hole position is less difficult because the hole is drilled with a jig, but the problem is that the instruction manual specifies a drill diameter of 8.5mm, which does not match the diameter of the hole in the jig. Note that 8.0 is actually just right.
Even though it says 11-15L, the luggage capacity is small, so don't expect too much.
View detail
Fits: SUZUKI GSX1300 HAYABUSA, HONDA CBR400R (2013-), HONDA CBR500R
Multi Bar with USB power supply for convenience
Quantity of Smartphone Holder:If set, the USB power supply can be conveniently located nearby. The installation can be safely used in conjunction with the key by connecting it to ACC.
Connected to DAYTONA Attachment Power Supply Unit D-UNIT.
View detail
For increased accumulation
I installed it to increase the Eliminator's storage capacity. There is still plenty of room for tools, Tire Lock, and rain gear. However, … I added a string lock to prevent it from flopping around when installed. I added a string lock to the round string to prevent it from slipping out if it is not tied properly. View detail