Reviews
Is initially overwhelming to look at on the minimoto with it's massive physical appearance but soon becomes part of the Grom
About quality and texture - The P4 right brake caliper from Brembo is made from cast aluminium with a gold anodized surface finish and includes brake pads, the quality from the overall fit and finish is perfect. About the feeling of use - The P4 right brake caliper is initially overwhelming to look at on the minimoto with it's massive physical appearance but soon becomes part of the Grom with it's gold finish that matches the forks so well, not to mention the improved feel and braking performance with it's larger diameter pistons and higher quality brake pads. Products to buy together - The Honda Grom is an inexpensive motorcycle with a lot of low quality parts from the factory, so the purchasing of other high quality parts like this P4 right brake caliper from Brembo would be perfect but the essential product to purchase to complete the installation is a front brake bracket to allow for the meshing together of the Brembo brake caliper and the Honda lower fork leg. Difficulty of installation - The installation of the P4 right brake caliper is a intermediate task that took 0.7 of an hour to complete. Some mechanical aptitude and the use of basic hand tools is what is required to secure the P4 right brake caliper to the bracket and bleed the brake caliper. Cost performance and comparison with other products - I find the cost of all the products Brembo sell to be higher then what most other companies sell their products for and the P4 right brake caliper is no different, but this is due to the high quality materials used and the consistent high quality finish of their products. About shipping and packaging - With there being no significant cost difference between sea freight and EMS for the P4 right brake caliper, I chose EMS for an earlier arrival dates. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - For my location, purchasing performance products like this from Webike Japan is the only option. There are a few local stores selling parts for the Grom but the range is very limited. View detail
Offers a stunning new look over the factory red brake caliper while also improving braking performance
About quality and texture - The P2 rear brake caliper from Brembo is made from cast aluminium with a gold painted surface finish and includes brake pads, the quality from the overall fit and finish is perfect. About the feeling of use - The P2 rear brake caliper offers a stunning new look over the factory red brake caliper while also improving braking performance with it's larger piston diameter and higher quality brake pads. Products to buy together - The Honda Grom is an inexpensive motorcycle with a lot of low quality parts from the factory, so the purchasing of other high quality parts like this P2 rear brake caliper from Brembo would be perfect but the essential product to purchase to complete the installation is a rear braided brake hose. Difficulty of installation - The installation of the P2 rear brake caliper is a intermediate task that took 0.7 of an hour to complete. Some mechanical aptitude, knowledge on disassembling the Honda Grom and the use of basic hand tools is what is required to secure the P2 rear brake caliper to the bracket and bleed the brake caliper. Cost performance and comparison with other products - I find the cost of all the products Brembo sell to be higher then what most other companies sell their products for and the P2 rear brake caliper is no different, but this is due to the high quality materials used and the consistent high quality finish of their products. About shipping and packaging - With there being no significant cost difference between sea freight and EMS for the P2 rear brake caliper, I chose EMS for an earlier arrival dates. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - For my location, purchasing performance products like this from Webike Japan is the only option. There are a few local stores selling parts for the Grom but the range is very basic. View detail
It's pretty~
최고에오About quality and texture About the feeling of use Products to buy together Difficulty of installation Cost performance and comparison with other products About shipping and packaging Any concerns, cautions, or advice when purchasing View detail
Cheaper than Korea by purchasing good products directly
First, I purchased a good product through direct purchase at about 2.5 times cheaper than the domestic price.
Thank you for the fast delivery, excellent quality, and packaging.
When installing, it was easy to search without any product processing or unnecessary steps, and above all, comfort was provided when worn.
Of course, the style has also been upgraded to add more coolness.
Winter has passed and now it's time to store it, but I'll enjoy it for a little while until early spring.
Due to the nature of consumables, there is room for additional purchase ------------------------------------------ ---------------- First, I purchased a good product through direct purchase at about 2.5 times cheaper than the domestic price. Thank you for the fast delivery, excellent quality, and packaging. When installing, it was easy to search without any product processing or unnecessary steps, and above all, comfort was provided when worn. Of course, the style has also been upgraded to add more coolness. Winter has passed and now it's time to store it, but let's enjoy it for a little while until early spring. Due to the nature of consumables, there is room for additional purchases. Powered by Google Translator
View detail
Get them while you can
These are factory Suzuki units for the RK. These will bolt onto any oil cooled GSXR 750-1100. The only difference between these and the ones off a 90-92 GSXR 750 (USA model) is the inlet where the carb meets the intake is +2mm bigger (not the bore that accepts the carbs - this is the same and will fit 38-40mm CV carbs or RS series), which makes them the most desireable ones to have. Again, if you are building an oil cooled GSXR buy these units now. They are NOS factory suzuki intakes and will bolt up and match the ports of any oil cooled GSXR. All suzuki intakes have been discontinued for years and are ney impossible to locate used. View detail
TANAX OFFSET HOLDER 45
Thank you so much for the quality and delivery. After the release of the new Monkey 125, it seems that this part is the part that can be used to counteract the extreme vulnerability related to the side mirror visibility. Due to the recommendation from other Monkey users, I will purchase it without hesitation and use it well. -------------------------------------------------- -------- Thank you so much for the quality and delivery. After the release of the new Monkey 125, it seems that this part is the part that can be used to counteract the extreme vulnerability related to the view of the side mirror. Due to the recommendation from other Monkey users, I will purchase it without hesitation and use it well. Powered by Google Translator View detail
Thanax M10 mirror bolt cap
Quality and Texture Information The feel of the plastic product is clean. Products purchased together TANAX: Off-set Holder 45 is easy to install.
If you install it alone, you will be able to prevent problems that occur due to the bolt fixing part being exposed at the top.
Webike delivery and packaging are in excellent condition. Thank you. -------------------------------------------------- -------- Quality and Texture Information The feel of the plastic product is clean. Products purchased together TANAX: Off-set Holder 45 is easy to install. If you install it alone, you will be able to prevent problems that occur due to the bolt fixing part being exposed at the top. Webike delivery and packaging are in excellent condition. Thank you. Powered by Google Translator
View detail
KITACO Headlight Visor
The quality and design of the product seem to be the best. I think this is where a design can be completed with just one small, small part.
We are grateful to Webike for ensuring that parts sent far away are received safely. -------------------------------------------------- -------- The quality and design of the product is top notch. I think this is one of those things where you can see the completeness of the design with just one small part. Thank you Webike for making sure that parts sent to far away places are received safely. Powered by Google Translator
View detail
สินค้าถูกจัดเตรียม และ ส่งออกมาได้อย่างรวดเร็ว ของมาถึงเร็วมาก แพ็คเกจหนาแน่น ไม่ได้รับความเสียหายใดใด ตัวสินค้าสวยงาม ราคาเหมาะสม เล็กกระทัดรัด รูปทรงสวยงาม View detail
I really like the design and feel safe from falling.
Installed on Hunter Curve. There was some difficulty in getting the positioning for installation, but it wasn't a big problem. However, the length of the knuckle guard for versatility is long, so when the handle is steered left and right at the maximum angle, the throttle cable gets caught on the end of the right knuckle guard and interferes with it, so it was machined, cut, and installed. -------------------------------------------------- -------- Installed on Hunter Curve. There was some difficulty in getting the positioning for installation, but it was not a major difficulty. However, the length of the knuckle guard for versatility is long, so when the handle is steered left and right at the maximum angle, the throttle cable gets caught on the end of the right knuckle guard and interferes with it, so it was machined, cut, and installed. Powered by Google Translator View detail
Fits: YAMAHA SRX400, YAMAHA TT250R RAID, YAMAHA TT250R RAID, YAMAHA TT250R RAID, HONDA CB125R, HONDA CBR125R, HONDA CBR250R, HONDA CBR250RR, HONDA CT200, HONDA SPADA (VT250), HONDA XLR250, HONDA XLR250, YAMAHA BRONCO, YAMAHA DRAG STAR250, YAMAHA DT125R, YAMAHA DT125R, YAMAHA DT200, YAMAHA DT200R, YAMAHA DT230 LANZA, YAMAHA FZ250 FAZER
very good
There is no need to say anything about the quality as many people already use DID’s premium products. I am also satisfied with the sensibility that gold gives. DID's original tool KM set is required for installation and was installed using an additional 400 optional tool. As it is a rivet joint, a certain level of technical difficulty is required, but it was not very difficult. -------------------------------------------------- -------- There is no need to say anything about the quality as many people already use DID premium products. I am also satisfied with the sensitivity that gold gives. DID's original tool KM set is required for installation and was installed using an additional 400 optional tool. As it is a rivet joint, a certain level of technical difficulty is required, but it was not very difficult. Powered by Google Translator View detail
Fits: HONDA HORNET, HONDA JADE, HONDA VTR250, HONDA VTR250F, HONDA V-TWIN MAGNA250, HONDA VTZ250, HONDA XELVIS
Great
About quality and texture Good Product. light weight. About the feeling of use good for the smooth run. About shipping and packaging Fast Shipping. package is well no way to damage View detail
Fits: HONDA NSF100, HONDA SUPER CUBC125, HONDA SUPER CUBC125, HONDA DAX125, HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125, HONDA glom, HONDA glom, HONDA glom, HONDA CROSSCUB110(FI Vehicles), HONDA CROSSCUB110(420Conversion), HONDA CROSSCUB110(420Conversion), HONDA SUPER CUB110-PRO(FI Vehicles), HONDA SUPER CUB110PRO, HONDA SUPER CUB110(FI Vehicles), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110, HONDA APE 100
KITACO Drive Sprocket (Front)
It has good quality that can replace the genuine product.
Kitako products are popular with many buyers and are of excellent quality.
Considering the low cost and long durability, it would be difficult to choose a better product than this product.
I will continue to use this product and thank you for allowing me to use this great product. -------------------------------------------------- -------- It has good quality that can replace the genuine product. Kitako products are popular with many buyers and are of excellent quality. Considering the low cost and long durability, it would be difficult to choose a better product than this product. I will continue to use this product and thank you for allowing me to use this great product. Powered by Google Translator
View detail
Fits: HONDA glom, HONDA DAX125, HONDA MONKEY125, HONDA CT125CT110 HUNTER CUB, HONDA SUPER CUB110, HONDA CROSSCUB110
KITACO Drive Sprocket (Rear)
I am satisfied with the quality of Kitaco's rear sprocket in terms of quality and texture.
I was using a 420 chain by mistake, but I bought it for 428. I can use it later when I change to a 428 chain.
I guess I'll take it as a consolation and buy it again ^^
However, since I purchase Kitaco products with confidence, I will use them well. -------------------------------------------------- -------- I am satisfied with the quality of Kitaco's rear sprocket in terms of quality and texture. I was using a 420 chain by mistake, but I bought it for 428. I can use it later when I change to a 428 chain. I guess I'll have to take this as a consolation and buy it again ^^ However, since I purchase Kitaco products with confidence, I will use them well. Powered by Google Translator
View detail
I highly recommend it
Don't be afraid It gives you a firm grip on every corner With this, I'm not afraid of Valentino rossi also, you'll be a Valentino rossi If you hesitate, delivery will only be delayed. View detail
Fits: YAMAHA WR250R, KAWASAKI ZX-25R, KAWASAKI Z900, KAWASAKI NINJA250SL, HONDA CRF250M, HONDA CBR600RR, HONDA CBR1000RR, HONDA CB400SF, HONDA CB1100, HONDA PCX, HONDA PCX150, HONDA PCX160, HONDA Cross Cub 110, HONDA Cross Cub 50, YAMAHA NMAX, HONDA Super Cub 110, HONDA Dax70, HONDA Dax125, HONDA APE100, YAMAHA Majesty-S
Yoshimura oil filter cap..
Item arrived... quality built Is good...colour red..nice...took a while to arrive due to no stocks, overall very satisfying..never been disappointing..thank you team webike..more to come. View detail
Fits: KAWASAKI ZRX1200, KAWASAKI ZR-7S, KAWASAKI ZR-7, KAWASAKI Z750S, KAWASAKI Z1000, KAWASAKI ER-6n, KAWASAKI ER-5, HONDA CBR650RA, KAWASAKI Versys 650, KAWASAKI Ninja ZX-6RR, KAWASAKI Ninja ZX-6R, KAWASAKI Ninja ZX-14R, KAWASAKI Ninja ZX-14, YAMAHA FZR6, YAMAHA FZ6R, YAMAHA FZ6, YAMAHA FZ10, YAMAHA FZ09, KAWASAKI Tengai, KAWASAKI ZRX1200 DAEG
Be careful and read before you buy this.
This grip could not fit to your motorcycle. Even if the product describes you can use this, it may not be on your bike. I got one cuz it was supposed to fit my bike but it didn't. so I asked it seller(the brand Kijima) and they replied that 'This item is not compatible with Eliminator 450. Eliminator 450(US imported version) and Eliminator 400(Japanese domestic version) are completely different motorcycles. So I asked about the dimensions of the handlebars to official Kawasaki global and they replied 'The diameter of the EL400's handle bar is same as that of EL450's.' I sent this reply to the seller and got the reply 'The compatibility information on our website states that it is universal. Therefore, some processing may be required. Please understand that if a customer buys the wrong item due to a confirmation error, we cannot accept returns / refund.'. When I received this message, I gave up to claiming it and decided never to buy anything from Kijima. View detail
fitment issues
I was excited to recieve this poduct. There are a few fitment issues with these plastics for my af27 dio. The front piece the 4 bolts on the back side only two line up the other two are so far off would need to enlarge holes to make it work. The top headlight piece does not fit well pops out on the one side and on the middle. The rear pieces seems to fit alittle better but not the best. View detail
Doesn't fit to Kawaski Eliminator USA version
EL450 USA doesn't use the same connector as the JDM version. So you can't use this on your motorcycle. Don't waste your time and money. View detail
Fits: YAMAHA MT-07, YAMAHA MT-07 Tracer, YAMAHA XSR700, YAMAHA FZ-07 , YAMAHA TENERE 700
Genuine GBRacing Cover Set for MT07 2016
Because this bike had a bit of an accident and was getting rebuilt, the customer asked if there was anything else they could add which would help protect it against any further mishaps. I do tend to suggest that GBRacing engine kits are the way to go and this was the case here. Finding the right set was not hard as I just used the search function on Webike and then for my own peace of mind, I cross referenced with GBRacing website. With a few other smaller parts in my order, I had them all shipped together to save on costs and all arrived safely via EMS in 5 days from being shipped. The box all arrived well padded and the covers were in their own little GBRacing packets anyway. This set comprised of just the generator cover and the clutch cover which is more than sufficient for this bike and how small it is. The covers are made of some kind of composite and not just plain old plastic like a lot of other companies use. These are tough puppies and do withstand a good knock and or scrape down the road. They really are the mutts nuts when it comes to engine protection. All the necessary parts needed were aleady in the packets so there is no need to go hunting for specific bolts etc. You can feel the quality of these covers from both outside and inside. There is even a nice little GBRacing logo perched inside a cut out on the covers. Good touch. The fitting was pretty straight forward. Just take your time and make sure you have everything at hand before you start and you will have no issues. I also tend to use a little copper slip for the bolts which stops them from becoming stuck in there if you ever need to change them out. Cracking job Webike, thank you for the help. View detail