Reviews
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R SE, KAWASAKI NINJA ZX-4RR
This is a good one.
[How is it used?
Mountain to City Riding
Was the one you received as per Image?
Street Image
Was the installation difficult?
Throw to Motorcycle shop
How was your experience with it?
Nice, Front's is Recommendation.
[Included Parts:were they on?
Sticker available
[Was there anything that disappointed you?
None in particular
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
A bit pricey.
With bar ends made entirely of gold, the basic rule is to replace the bar end when it falls over, but in this case, only the resin part can be replaced, so there is no need to buy a new one if it is just a standing bump.
However, the replacement of the resin part is a bit Large strange.
View detail
It's shit.
I purchased it because of the mounting diameter Φ54, but the actual size Φwas only 45.
I couldn't get a direct fit on my SR400 CVcarburetor. It sucks. I tried to force it on and it deformed and I can't return it. It is a real piece of shit.
View detail
Added photo of the bracket portion of the installation.
I didn't have a picture of the Bracket part of the installation when I posted last time, so I added a picture anyway. Just for reference. View detail
Safe and secure
Plug is still NGK!
Nothing to complain about, perfect.
View detail
Fits: SUZUKI GSX-R125, SUZUKI GSX-S125, SUZUKI ST250, SUZUKI katana, SUZUKI GSX-R1000
GSX-S125 2023 has differences such as Wiring allocation
[How is it used?
Installed on a DL32D GSX-S 125 2023, used to take out ACC power from a DAYTONAD-UNIT WR. (I plan on wiring the D-UNIT WR with Fog and Others additional power system)
Was the one you received as per Image?
No problem.
Was the installation difficult?
When installed on a 2023 model (DL32D), the ACC (+ wire for Attachment) and GND (Grounding Wire) of this product are reversed. In my case, I connected the ACCPower Cord of D-UNIT WR to the GND wire.
Also, in the 2022 and earlier models, a blind lid was attached to the connector on the body side of the GSX-S 125, and there was no connection beyond that point, but as shown in the photo (…) in the 2023 model, another connector was connected beyond the connector on the body side, and the wiring seemed to extend beyond that point. As you can see in the photo (…), in the 2023 MODEL, another Connector is connected to the end of the Connector on the Body side, and Wiring seems to be extended to the end of the Connector.
Therefore, we disconnected the OEM's Connector and inserted our product between them.
How was your experience with it?
The objective of getting ACC power was achieved without any problem.
[Included Parts:were they on?
users' manual
[Was there anything that disappointed you?
Not particularly
Some may consider this product to be price sensitive, but I think it is a good choice because it can be quickly returned to NORMAL when sold.
View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
light
[How is it used?
After installation, the car traveled about 200 km.
Was the installation difficult?
It is not so difficult to install except for the Flange, which is a type of two-piece flange, so it is difficult to install unless you get under the motorcycle.
How was your experience with it?
The OEM one is quieter, both idling and running, but the OEM one is louder. Personally, I was satisfied with the quietness, as it was just right for me. The sound quality is not as harsh as the OEM, but low and smooth.
Lightness is somewhat felt when pushing and pulling.
[Was there anything that disappointed you?
There are too many springs to install, but since spring hooks (devices) are not included, it is better to prepare them.
[Others]
Point or hang for installation...nothing special. If you dare to say so, there is no need to twist the O2 Sensor when installing it. If you install the O2 Sensor lightly before fixing the middle Pipe and turn the Pipe side around, you don't have to worry about the O2 Sensor wiring twist.
Availability and clarity of Instruction Manual - I can understand without it.
Items to buy together...Gasket is a good thing to have. The only other thing I need is heat resistant grease.
【Review】
Personally, I don't like the length of the exhaust end, the degree of raising, and the color (I prefer shorter, lower, and Polished Titaniumium), but I am very satisfied with the lightness, the Hand Bent-like curve of the exhaust pipe, and the high quality sound.
View detail
I did it anyway.
Slip-on lineTruck di, and I put it on!
The look of the first Silencer in the shape you're interested in is self-satisfying.
It is not too much, but it is something better. By the way, as soon as I put it up.
The material is aluminum, so it looks like a cord when peeled off.
I hope that the heat will make it disappear. I hope the heat will make it go away.
View detail
Bar end mirror for option719
The handlebar width is very narrow and the position is very comfortable. If you are used to NORMAL, it will take some time to get used to the low speed operation. But it is easy because it is made of aluminum.
The brake hose interferes with the meter, so the mounting position is usually fixed, but it is a good product.
View detail
Clutch becomes lighter
I installed it on New Model GSX1300R HAYABUSA.
In fact, this time we are replacing VRD, also by GALE SPEED. replacing VRD to VRC from higher MODEL to Standard model may sound strange, but there are actually various reasons.
First of all, I was attracted to this VRC the moment I received it and opened the box. It looks like a work of art indeed, and just looking at it raised my Tension and made me feel that it was worth the high price.
I think it beats bremboRCS just for the smooth surface treatment. To be honest, I don't understand why brembo's RCS is so popular. I used to be a brembo RCS fan, and I used to think that no matter what kind of motorcycle I switched to, I would first replace it with brembo's RCSMASTER.
However, I felt the quality of brembo's forging was not worth the price. I was tired of that, so I chose GALE SPEED's Vine VRC this time.
Back to the story, I first went for the VRE feel and went for the bright black VRD for Cost considerations, but I quickly gave it up and went with this VRC because it looks like RCS and I felt something was wrong with it. I am usually a Touring Maine, so I can't tell the difference between VRD and VRC! Still, I chose it because of the way it looked. If that's what you enjoy, then that's fine.
Finally, after installing it and running it for a bit, it feels very good - lighter than the OEMClutch, and a little bit better at 17.5mm.
※※※※ Note ※※※※
New Model GSX1300R HAYABUSA will change the clutch master, [Hill HoldControlSystem will not be available.
The reason is that with the OEM clutch switch, if the clutch is released for a moment, the switch returns, the ECU recognizes that the car is starting, and the rear brake is released. However, with the external clutch master, the switch remains pressed until all the clutch is released, so the car is not detected as starting, the rear brake remains on, and even if the Axel is turned, the car does not move forward! This is very dangerous. I would like to see any Manufacturer solve this!
↑ It may be a little confusing, but try it yourself, it will never start!
In my case, I have turned that function off.
View detail
I'm glad I took the plunge and bought it.
I was wondering if I wanted to change the exhaust system, so I looked on the Net, but I was wondering if Japan Government Certificated was the safest choice, but it is expensive.
Spending tens of thousands of dollars just for looks and sound? I thought, "I want it, but I want it more and more, and the OEM Exhaust System is already looking more and more lame.
So, well, I took the plunge and bought it, even though I would regret it.
The installation was O2 Sensor was Large odd.
I had seen on YouTube how easy it was to remove it by groping, but no, no, no, no, no, no, no, no, no, no, no, no, no, no, no, no.... I can't even get my fingers into the claws.
But even that [Color] Once I cleared it, the rest was easy, even for a novice like myself.
You will want to ride it as soon as it is installed.
First of all, when the Engine is turned on, the power increases and the sound becomes Large. But it is Cool.
Then I started running, and guess what? Isn't it getting a little stronger?
I could clearly feel the difference, and when I drove at high speeds later, the RPMs increased, probably due to the improved air flow, which also increased the maximum speed.
Riding the Motorcycle has become many times more enjoyable.
The Sound of the embellishment is especially numbing.
So I'm really glad I bought it, even though I'm scared of the debit at the end of this month.
I may be doing more long-distance touring in the future.
View detail
The texture and feel are both good.
[How is it used?
Because the OEMLever of the GSX-S 125 is not adjustable, and also to Upgrade its appearance.
We compared it to Endurance's Lever, but this one seemed to be more to our liking in terms of lever shape, length, etc., so we went with this one.
Was the one you received as per Image?
The texture is as good as the picture shown.
Was the installation difficult?
No problem.
How was your experience with it?
The adjustable type is easier to adjust to the position of your choice, and it also feels better when you run.
[Included Parts:were they on?
I think it came with a ManufacturerLogo sticker.
[Was there anything that disappointed you?
Nothing in particular. I dare say that the Retractable Lever was so loose that it moved immediately after arrival that I had to retighten the nut to prevent it from moving.
Blue Anodized is a little lighter than U-KANAYA's Blue, etc. I think it fits GSX-S125's Birdton Blue. (The Normal Holder has a large amount of play, so it may rattle a little, but I think that can't be helped. If you are worried about the rattling, it would be better to replace the MASTERBODY with Landor or brembo.
View detail
For a casual dress-up look
Used for KSR2 (B6).
I purchased this product not only for its function as a protector, but also for cosmetic repair of oil tanks, which inevitably deteriorate and become yellowish and not so good looking.
The Protector I received was simple, but when I assembled it temporarily, it fit the car body without any problem and the screw holes were perfectly positioned. When I tightened the oil tank using the long screws provided, I could feel that the oil tank is securely guarded. It depends on the individual body of the vehicle, but on my KSR2, there was no interference with the fork outer even when the handlebar was fully locked to the left position. I am very happy with the exquisite clearance. I think it might touch if it falls down and there is a strong impact, but it would be the same without Protector.
I was so happy to see the glimpse of Carbon through the gap of Shroud. I am glad I bought it.
View detail
Fits: HONDA CT125 CT110 HUNTER CUB
Meter visor even cooler than expected??
I purchased the ENDURANCE Meter visorLong set + installation kit for CT125.
I was a little excited when I unpacked the package because I had been planning to install this product for a long time....... The installation was easy and took only about 30 minutes without any stress, and it did not interfere with any surrounding parts.
Visor, which looked so small at first sight, now its presence is upgrading HUNTER to Wilde and I am very satisfied with it. ?? I am sorry for doubting.
Tightening is still the way to go. [Color] Smoke.
Thank you for a really good product.
View detail
Japanese Vehicle Inspection Correspondence
Before the inspection of SR400, I went to the tester place off site to check the light intensity. I had to go back and forth to Tester two years ago, but they did it without any extra charge, I switched to the new Stanley Hyper Halogen LightValve, which I brought with me again. It is just 150mm away from the specified light level, but it is OK.... Hyper Halogen Light is a high efficiency valve and can be brighter with the same power consumption as the standard valve, but it seems to have a shorter life. View detail
It is easy to install.!
OEMHalogen was replaced because it was too dark.
Installation is a simple matter of removing and replacing the OEM. I did a test run during the daytime, and it was a little brighter in the Tunnel. I don't drive much at night, so no problem! I don't drive much at night, so no problem! I don't know about durability, but I'm happy with JAPAN, it's well made and looks good.
View detail
Fits: DUCATI PANIGALE 899, DUCATI PANIGALE 1199, DUCATI PANIGALE 1199 S, DUCATI PANIGALE 1199 R, DUCATI SUPERLEGGERA 1199
Standard Custom
About 5 cm higher than OEMScreen? It's about 5 cm taller than the OEMScreen, so it's more effective Large on the highway and looks better. I'm not a CircuitUser, but I'm satisfied with Large. View detail
Shift rod
There was some distortion of the Screw, but so far it's working, so no problem. If I had wanted, I would have wanted a Plating system. View detail
I'm good.
Replacing the CDI on a '92 SR500 that had failed.
Thank goodness OEM Product was already discontinued!
Installation is done by connecting the Connector to the Quantity:It was easy to install the 2pcs. CDIBody is attached to the Frame with Tie Wrap.
It is equipped with an advance angle adjustment function, but I have set it to the NORMAL position for now and will experiment with other positions in the future.
I'm not sure how durable it is, but I'd appreciate it if it lasts longer.
View detail
I thought setting was necessary.
BITO's Settled fcr,
what kind of state (Exhaust System, ignition system, etc.) I don't know if you did the Setting in the
It is unknown, so if you are particular about it, you will need a Setting that matches your vehicle.
As for the delivery time, it was originally scheduled to take about 3 months, but it arrived in one month.
View detail