【RK】Mega Alloy X Brake Pads Review
Fits: SUZUKI GSX-R600, SUZUKI GSX-R1000, SUZUKI GSX-R750, SUZUKI GSX-R1000, KAWASAKI ZX-6R, KAWASAKI ZX-10R, KAWASAKI ZX-10R, HONDA HORNET600, HONDA HORNET600, HONDA CBR600F, HONDA HORNET600S, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CB1000R, YAMAHA YZF-R6S, YAMAHA YZF-R6, YAMAHA YZF-R1,
Mega Alloy X Brake Pads Rear
Replaced from OEM Brake Pads.
We purchased the product first because of its low price and reliability.
My impression of the Brake Pads when installed is that they seem to be more controllable than gutsy.
When the speed is too high, the Rear brake is used to control the speed.
I don't think the controllability will change between OEM and Large.
However, I wonder if it would be possible to recommend Brake Pads if you want to have consumable wigs that cost as little as possible and are reliable.
It may be better to use it only for touring use.
Responses
Other reviews
OEM Comparison
Change from OEM.
It works well enough before the bite.
I replaced the front and rear at the same time and it is much easier to control the Rear.
Specifi cations that even a heavy Motorcycle like the 14R can afford.
View detail
Used in Circuit
Used in Circuit run at NINJASL.
It is useful because of its good balance of price, efficacy, and durability.
View detail
Review after the run.
I drove about 1,000 kilometers.
The feel is just as I expected. It's nice.
Satisfied that all OEMPad complaints have been addressed.
I thought the pad was relatively soft touch.
That is not to say that it slides, but I can feel the disc gripping firmly on the lever and it feels very secure.
The front suspension responds more agilely to PitchControl with a slightly stronger grip, not to mention deceleration at corner entry, which increases the enjoyment of the car.
Stress-free anyway!
The braking power was perfect, and when I activated the ABS for a trial run, I had a good feeling that it activated with the timing I wanted.
I also ran RainCondition and it seems to work better than Dry.
That is acceptable, but with Rain it squeaked a bit.
It seems to resonate with the anti-noise Plate that was attached to the car, and even in Dry, there is a large chattering sound while driving.
Maybe I'll take it off next time.
View detail
I like the affordable price.
[How is it used?
It has been about two weeks since I installed it.
The initial braking effect is now more stable and I can brake with more confidence than with the previous Pad.
Breaking before Curve, especially when Speed is on, has become very reassuring.
Was the one you received as per Image?
It was just as Image.
Was the installation difficult?
It was installed without difficulty.
How was your experience with it?
During the break-in period immediately after installation, I hit it with a series of hard hits.
It seemed that the heat was also firmly applied at that time, and after the hit, the play touch just before the Corner was very good.
After that, the effect seems to stabilize as some heat is applied.
(Please note that this is just a layman's opinion and not an accurate one.)
[Included Parts:were they on?
It was Body only.
[Was there anything that disappointed you?
Not particularly
Durability is yet to be determined, so I hope for the best.
View detail
858 and 859 for V str 650.
The OEM pad on the V-Stroke was not very good, squeaking and slipping, so I quickly replaced it.
The rating is normal because it has just been installed and has not been run yet.
I was torn between sbs and Mega alloy, but I chose Mega alloy because I had a good feeling about RKJapan's Fine alloy when I used it on my moped.
I see that the Pad surface is slippery. It seems to work well.
What bothered me the most was that the OEM Fluid was already stuck in place after less than a year.
That being said, I installed it with Plate for now to stop the crying. I am looking forward to going for the next run!
View detail