【ACTIVE】Vehicle Exclusive Throttle Kit [TYPE-3] Review
The only thing that's hard to do is install it.
If you can do this as a DIY project, you are no longer a beginner. It's a high probability intermediate to advanced CustomPEOPLE. Even if you don't have a problem with the installation, you have to look at the clearance through the Cable, especially around the Handlebar, and the room for the Handlebar full lock while crossing in three dimensions. Best position. It is essential to become traumatized to the beginner because it is not possible to divide "Handlebar". In the worst case, not only Handlebar, but also Steering Damper and Brake folder, which do not need to be removed, and Top Bridge will have to be removed inadvertently. It is better to ask a motorcycle shop to remove the Handlebar and the Steering Damper, Brake folder and Top Bridge.
Responses
Other reviews
Tighten up your looks.
I replaced it because I wanted to control the Axel opening degree to severe a little more.
The FSprocket is raised two pistons, so the accelerator operation in the low speed range becomes more peaky.
By. "What a hard CBR to ride. ♪ I've become ♪
Well, that was the point ……
44Φ would it have been better? And a little regret. (Sweat) 。
View detail
No complaints!
We introduced it to improve handling of Switch box!
I was satisfied very much because I was able to achieve the original purpose as well as improve the things that I was feeling roasted. However, installation and switching box processing was Large strange.
View detail
High throttle kit installation
'13 Installed on DUKE 200. Select 44 φ Throttle
Corresponding year ~ ~ 12, but it is possible to install without problems.
Since the Switch box is still NORMAL, we moved the Switch box inward by the thickness of the High throttle kit, and the Brake lever holder also moved inward, but there is no effect on the operation feeling.
At that time, it is necessary to either re-drill a hole in the convex part of the Switch box, Handlebar, or pull out the convex part of the Switch box.
Installation is not difficult as it uses NORMAL's Throttle Wire as it is.
Until now, I did not need to grasp the place I was grasping at Full throttle, just opened up with the return of my wrist.
Since throttle operation is not so difficult as to reduce the degree of opening, the feeling of operation is the same as NORMAL.
View detail
He would like to improve regrasping [ highway ] and it purchases. It is necessary to make attachment a Switch box other than this Kit at a thin shape. When extraction of a Wire issued attachment downward difficultly, the crack went into the Cowl
He would like to improve regrasping [ highway ] and it purchases.
It is necessary to make
attachment a Switch box other than this Kit at a thin shape.
When extraction of a Wire issued
attachment downward difficultly, the crack went into the Cowl.
As for it, an effect is a cinch with 42 pies. [
]
It regrasps and can turn now that there is nothing.
View detail
Since the elegance only for a vehicle type was not sold, these goods were diverted! ♪ which I regard as whether appropriation is possible if it checks firmly since conformity is also written in detail
Since the elegance only for a vehicle type was not sold, these goods were diverted! ♪ which I regard as whether appropriation is possible if it checks firmly since
conformity is also written in detail
View detail