【NISHIMOTO】Side Stand Review
CT125 as a fall-back option to CT125.
[How is it used?
When a heavy load (box + tandem, etc.) is placed on the rear carrier, the side stand alone will not allow the front to move up, and the front will not allow the rear to move down.
Introduced as an auxiliary STAND because the vehicle body collapses as it is.
Was the one you received as per Image?
The product is quite gussied up and seems to be stronger than OEMSTAND.
Was the installation difficult?
It is easy to use, as it is just a matter of tightening it to the Tandem Footpeg, but it is not a dedicated product.
Interference countermeasures (Washer, body shaving, etc.) in actual product matching.
Bolt selection appropriate for strength (I use HondaOEM 8*34Socket Bolt 90112MBRJ10)
is required
How was your experience with it?
I am satisfied because the stability has been improved as expected and there is no sign of front up and tipping over even with luggage loaded on it.
Of course, there is no side stands switch, so care must be taken not to leave it out while driving.
[Included Parts:were they on?
It came with Bolt and Washers, but I did not use any of them.
(Washer with brim, Bolt, etc. as described above are prepared separately.)
[Was there anything that disappointed you?
There are considerable spatter marks and the visual quality is not flattering.
It's not a place to look seriously, so I personally don't mind it too much.
Responses
Other reviews
Perfect bolt-on side stand for SA50 Elite
This side stand is a perfect bolt-on solution to get rid of the center stand on your SA50 elite. The perfect side stand if you don't own a welder as it feels solid / secure when mounted. View detail
Perfect bolt-on side stand for NQ50 Spree
This side stand was easy to mount, and fit perfectly! It is exactly what you need if you AF-16 swap your honda spree! View detail
Stability is improved.
When I loaded the AA04 with luggage, it seemed to fall over when I hung the Side Stand on it, and I was worried about its stability, so I installed it.
The product itself is heavy and solidly built, so durability is not a problem.
Installation takes about 10 minutes if you have the right tools.
View detail
Mounted on Rear side of CT125
Mounted on Rear side of CT125 CT110 HUNTER CUB.
As the previous reputation says, a normal Side Stand is not reliable with a 50? box attached, and according to the posts, it can fall over….
The installation method is simple:remove the hexagonal bolt that holds the Left Tandem Footpeg and fasten it there.
I have a JA65, but when I tried to tighten it together with the Tandem Footpeg, the shape did not fit well, so now I only have the power stand attached.
I will try to add both Tandem Footpeg and Tandem Footpeg with a little ingenuity in the near future.
When you put it on, the sense of security changes all the time.
It is a little cumbersome to get used to the action of putting out and lifting up both Side Stands, but if that compensates for the safety aspect of being less likely to fall over and the feeling of security, then it is not a problem.
It was very well made and very nice.
Looks …… right? (Lol)
Amusement.
View detail
Durability.
It is very stable.
Center Stand is comfortable by becoming Side Stand because it lifts up.
Installation is easy
View detail