【ZETA】COMP Handlebar Dual Sport-Low Review
Fits: HONDA XR230, HONDA XR230MOTARD, HONDA XR250, HONDA XR250Baja, HONDA XR250Motard, YAMAHA SEROW225, Others
Maybe I should have squeezed it a little more?
[How is it used? From daily use to touring and driving on forest roads
Was the one you received as per Image? The height and aperture were a little different.
Was the installation difficult? It took me a bit of time to get the Accelerator Wire in place and I forgot that I needed one fixed hole…
How was your experience with it? Not quite what I expected … I mean, it was almost the same as the STD Handlebar.
[Included Parts:were they on? Everything was on.
[Was there anything that disappointed you? It was almost the same as the STD Handlebar, so I wondered if it was necessary to replace it with something other than color.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
When installed according to the Memory, the position is slightly misaligned, so it is necessary to visually check the position.
When modifying the handlebar guard, we recommend that you remove the handlebar guard and try riding with the handlebar installed.
Also, the handlebar guard may be slightly misaligned with the installation position, so it will be necessary to bend it by force.
Responses
Other reviews
There are some good things that only a comp bar can do.
I put a MOTARDMedium comp bar on my CRF250RLY50.
I had worn cx bar mx-123Blue before, but I thought it would be more comfortable with a little more aperture in terms of position. I decided that the comp bar would fit CRF250RLY50, which is not so strong and rigid, and bought it.
As a result Large was the right answer
The position, moderate rigidity of the handlebar, and coloring are perfect.
View detail
Used for DT50.
I'm 184cm tall and the OEMHandlebar was making me feel like Curve was repricing, so I changed it.
Operability has been improved.
View detail
Speaking of affordable aluminum handlebars...
[How is it used?
I was looking for an affordable external handlebar for my Serow225WE OEM handlebar, which I received from a friend, because the rust and distortion were too large.
Was the one you received as per Image?
Handlebar for TheOff-road motorcycle. The appearance of the product is not particularly distinctive, but it is solidly built and gives a sense of security.
There are three color variations (Blue, Red, and Titanium), so please enjoy coordinating your favorite colors with your motorcycle's body color.
Was the installation difficult?
As with the handlebars for off-road motorcycles made by other manufacturers, this is a Universal Product, so the Quantity:Pair (for Left and Right) When attaching the switch part of the "M", it is necessary to drill a hole with an electric drilletc. to match the convexity of the inside of the switch. (There is also a method of shaving off the convexity of the switch side, but I do not like this method.)
How was your experience with it?
I use it on my SEROW and it is not too high and not too low for me, and while it maintains rigidity, it also has the right amount of flexibility, so when I land on the ground after a jump or when I am suddenly pushed up on a steep slope, the impact on my wrists is somewhat offset.
[Included Parts:were they on?
HandlebarBody with Black Brace bar installed.
[Was there anything that disappointed you?
I have never been disappointed because I have checked the handlebars used on my friends' motorcycles before purchasing them.
0Other items that may be useful include
Point and hang of installation
There is no difficult task, but the Quantity:Pair (for Left and Right) The switch, mirror, and peripheral parts such as each leverretc. of the handlebar must be removed and reinstalled after the handlebar is replaced, which may seem troublesome.
In addition, the drilling of holes for the installation of both switches, the angle and quantity of the handlebar:Pair (for Left and Right) I think it is better to work on it slowly when you have time because of the positioning of Lever and other factors.
[Availability and clarity of the Instruction Manual
There is no Instruction Manual, and the Handlebar arrives in its original packaging.
[Notes]
Nothing special, just put the removed handlebar back on as it was attached and it will be Large sturdy.
Learn the Wiring arrangement well in advance before working on it.
[ITEMS TO BUY TOGETHER
Cushioning pad to be attached to the Brace bar should be purchased together with the Brace bar. "Rasiness" There are a variety of products on the market, including those made by other companies, so you can buy what you like.
If you take this opportunity to replace the grips with something you like, I think you will love it even more.
[Opinions and requests to Manufacturer
If possible, we would like to see more color variations, such as Green Light and Gold, so that there are more choices and they are more attractive.
View detail
Anyway, it's light.
I chose MOTARDMedium, which has almost the same shape as the OEMSteel handle of the crf250rally50
It has a slightly shallow aperture and is my personal favorite Handlebar.
Aluminum Handlebar is really light and changes handling drastically!
View detail
I put it on my old KLX250.
There is no difference between OEM and Large in terms of shape, but I feel that the weight is lighter during various operations. I am not a good driver, so I wanted to install ArmourGuard in case I fell down, so I had to replace it. View detail